Indication Of Uart Output; Indication Of Wireless Transmitting - Ebyte E70-868T14S2 User Manual

Cc1310 868mhz wireless module

Hide thumbs Also See for E70-868T14S2:

Table of Contents

Chengdu Ebyte Electronic Technology Co,;Ltd

5.6.1 Indication of UART output



To wake up external MCU



Buffer (empty): the internal 1024 bytes data in the buffer are written to the RFIC (Auto sub-packaging).



When AUX=1, the user can input data less than 1024 bytes continuously without overflow. Buffer (not empty): when

AUX=0, the internal 1024 bytes data in the buffer have not been written to the RFIC completely. If the user st arts to

transmit data at this circumstance, it may cause overtime when the module is waiting for the user data, or transmitting

wireless sub package.



When AUX = 1, it does not mean that all the UART data of the module have been transmitted already, perhaps the

last packet of data is still in transmission.

Chengdu Ebyte Electronic Technology Co,;Ltd

E70-868T14S2 user manual

Table of Contents

E70-915t14s2