Table of Contents
Advertisement
Start the programme
Press the Start button. The indicator
light will be lit and the programme will
start*.
*The Start button indicator light,
depending on the model
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
Press the Start button to cancel the
1.
programme.
Select a different programme.
2.
Press the Start button again . The
3.
new programme starts from the
beginning.
Cancel the programme
Press the Start button to cancel the
1.
programme.
To cool the laundry: Select the Rinse
2.
programme.
Press the Start button again. The
3.
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end during
$ Rinse Stop
The $ Rinse Stop indicator light will be
lit and the 0 Spin and Start button
indicator lights will flash*.
*The Start button indicator light,
depending on the model
To end the programme:
Select the Spin or Empty
1.
programme.
Press the Start button.
2.
(Setting depends on the model)
Operating the appliance
Programme end
The 0 Spin and Start button indicator
lights will flash*.
*The Start button indicator light,
depending on the model
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
If you cannot open the
Note:
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Scope of delivery ~ Page 12
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
■
and detergent drawer open so that
any residual water can evaporate.
Always remove the laundry.
■
Always wait until the programme has
■
ended, as the appliance could still
be locked.
en
27
Hide quick links:
Advertisement
Table of Contents
