Levelling; Electrical Connection - Bosch WAE20067ES Instruction Manual And Installation Instructions

Positioning and connecting
en
Height difference between the
■
installation surface and the drain:
Min. 60 cm, max. 100 cm
You can lay the water outlet hose as
follows:
Drainage into a washbasin
■
:
Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you
come into contact with hot detergent
solution (e.g. when draining hot
detergent solution into a wash
basin).
Do not reach into the hot detergent
solution.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
Make sure that:
– The plug does not block drainage
from the wash basin.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.
Drainage into a siphon
■
The connection point must be
secured using a hose clamp with a
diameter of 24 – 40 mm (available
from specialist retailers).
16

Levelling

Align the appliance using a spirit level.
Incorrect alignment may result in loud
noises, vibrations and machine
"movement".
Loosen the lock nuts using a
1.
spanner, turning it in a clockwise
direction.
Check the alignment of the washing
2.
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
Tighten the lock nut against the
3.
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.

Electrical connection

:
Warning
Risk of death!
There is a risk of electric shock if live
components are touched.
Never touch or hold the mains plug
■
with wet hands.