Glamox FL60 Series Operating Instructions Manual page 41

Navy/spot, with led
Table of Contents

Advertisement

Available languages

Available languages

de
en
fr
tr
el
es
pt
da
nl
no
sv
pl
cs
hu
Page 14 of 27
In the case of a star network, the floodlight must be connected to the power sup-
ply as follows:
L
= Phase
N
= Neutral conductor
PE
= Protective earth conductor
In the case of a delta network, the floodlight must be connected to the power
supply as follows:
L1
= Phase
L2
= Neutral conductor
PE
= Protective earth conductor
Max. 1 conductor can be connected at the terminal points (1) to (3). The connec-
tion terminal is suitable for the following line cross sections:
Applies to: FL601. . . . to FL606. . . . and FL60N4. . . . Navy,
as shown in Figure 3 to 6:
Flexible lines without wire end sleeve
Rigid lines
The following terminal points are also available for use, if required:
PE
= Protective earth conductor - Terminal points (4)
Max. 1 conductor can be connected at the terminal points (4). The connection
terminal is suitable for the following line cross sections:
Flexible lines without wire end sleeve
Rigid lines
The modules are connected at the terminal points (5) or the terminal points re-
main free.
Applies to: FL60S4. . . . as shown in Figure 7:
Fine wires with wire end sleeve
Stranded wires with wire end sleeve
Solid wires
Cable sheath Ø
- Terminal points (1)
- Terminal points (2)
- Terminal points (3)
- Terminal points (1)
- Terminal points (2)
- Terminal points (3)
0.5 to 10.0mm²
0.5 to 10.0mm²
0.5 to 16.0mm²
0.5 to 16.0mm²
0.5 to 1.5 mm²
0.75 to 1.5 mm²
0.5 to 2.5 mm²
6.0 to 10.0 mm
02.02.2016
7179761000/ Index 03 / DCN 21969

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents