Advertisement
Quick Links
H-3023, H-3024
H-3025, H-3026
H-3027
WALL-MOUNT
WIRE SHELVING
TOOLS NEEDED
Cordless Drill
(3/16" Drill Bit)
Shelf Bracket x 4
Screw x 12
Bolt x 4
1.
Mounting brackets should be spaced 1½" shorter
than the width of the shelf. Do this by measuring
from the center of one mounting bracket to the
center of the other. Drill top mounting brackets to
the wall using (2) anchors and (2) screws for each
mounting bracket. (See Figure 1)
Figure 1
PAGE 1 OF 2
Step Ladder
(Optional)
Shelf Support x 4
INSTRUCTIONS
PARTS
Mounting Bracket x 4
Anchor x 12
Post x 2
2. Align center mounting brackets about 17 inches
directly below the top mounting bracket, so it will be
at the midpoint of the posts. Mount center mounting
brackets using (2) anchors and (2) screws for each
center mounting bracket. (See Figure 2)
Figure 2
Tape Measure
Center Mounting Bracket x 2
Shelf x 2
Mounting
Bracket
17"
Center Mounting
Bracket
Phillips
Screwdriver
0514 IH-3023
Advertisement
Related Manuals for U-Line H-3023
Summary of Contents for U-Line H-3023
- Page 1 H-3023, H-3024 H-3025, H-3026 H-3027 WALL-MOUNT WIRE SHELVING TOOLS NEEDED Step Ladder Phillips Cordless Drill Tape Measure (Optional) Screwdriver (3/16" Drill Bit) PARTS Shelf Support x 4 Mounting Bracket x 4 Center Mounting Bracket x 2 Shelf Bracket x 4...
- Page 2 INSTRUCTIONS CONTINUED 3. Slide top shelf brackets onto posts. Fasten shelf 6. Drill bottom mounting brackets to the wall using (2) supports at the desired height of top shelf on both anchors and (2) screws for each mounting bracket. posts. Push shelf brackets down upon the shelf Use bolts to fasten posts to bottom mounting bracket.