Brake Adjustment - aidapt VP183WHITE Usage And Maintenance Instructions

BRAKE ADJUSTMENT

Your Aidapt Rollator brake system will require periodic adjustment.
Figure 11
To adjust the brakes loosen Nut B and then screw/unscrew Nut A. When adjusted re-
tighten Nut B. If further adjustment is required then loosen the Locking Screw and then
using a pair of pliers pull the cable down by approximately a millimetre. Re-tighten
Locking Screw. The brakes can then be adjusted further by loosening Nut B and
screwing/unscrewing Nut A as before.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
This includes:

Bent or damaged tubes or cracks at the tube joints.

Loose or worn horseshoe clips

Elongated adjustment holes.

Loose handles.

Loose or worn Wheels and wheel fasteners (where fitted)

Smooth, worn or split ferrules (rubber tips).
Replace all worn, missing or damaged parts where necessary. If in any doubt,
please do not issue or use, but immediately contact your supplier for service
support.
Usage and Maintenance Instructions
7
Ver.4 08/2013 (1902)