Advertisement
Quick Links
Advertisement
Related Manuals for Creative Structures Lounger M
Summary of Contents for Creative Structures Lounger M
- Page 1 Building instructions Lounger M Version 1.0 www.creativestructures.nl...
- Page 2 Building instructions Lounger M tep 1: Pre-assemble the leg-profiles (4x) Leg profile CS-0287 Foot CS-0292 Secure the parts with locking pins and securing rings Leg connector CS-0346 Check position of cut outs Page 1 www.creativestructures.nl...
- Page 3 Building instructions Lounger M tep 2: Unfold the structure Page 2 www.creativestructures.nl...
- Page 4 Building instructions Lounger M tep 3: Place the cover on the structure and fold back the whole unit Align the seams of the cover with the structure Page 3 www.creativestructures.nl...
- Page 5 Building instructions Lounger M tep 4: Attach the inner loops of the cover to the structure ends with H-shackles The cover has to be mounted in folde state because in that case there is no tension on the cover corners.
- Page 6 Building instructions Lounger M tep 5: Unfold the structure Page 5 www.creativestructures.nl...
- Page 7 Building instructions Lounger M tep 6: Tension the cover Unlock Pull the lever Hook in Page 6 www.creativestructures.nl...
- Page 8 Building instructions Lounger M When it is not possible to close the lever by hand, repeat step 4 and choose a lower hole number for the H-shackles When the cover is not tensioned enough, repeat step 4 and choose a higher hole number for the H-shackles...
- Page 9 Building instructions Lounger M tep 7: Connect the first end of the main cables to the cover frame (8x) Main cable CS-0298 tep 8: Connect the first end of the tension cables to the cover frame (4x) Tension cable CS-0345 Page 8 www.creativestructures.nl...
- Page 10 Building instructions Lounger M tep 9: Lift the cover and mount the first leg profile A tripot support can be used to keep up the structure and make the assembly easier Slide the connecting fork over the two pins of the...
- Page 11 Building instructions Lounger M tep 10: Connect the second end of the two matching main cables to the leg profile The cables can be connected easi- ly by lifting the corners of the cover frame or supporting them with a tripot Page 10 www.creativestructures.nl...
- Page 12 Building instructions Lounger M tep 11: Connect the second end of the tension cable to the leg profile The pelican hook should be closed easily. If not, extend the tension cable by turning the pelican hooks counter clockwise Page 11...
- Page 13 Building instructions Lounger M tep 12: Repeat step 9 - 11 for the second, third and fourth leg profile tep 13: Stabilize the structure by shortening the four tension cables By tensioning the tension cables, all main cables are getting tensioned and the structure will get rigidity Page 12 www.creativestructures.nl...
- Page 14 Building instructions Lounger M tep 14: Anchor the structure For the different anchoring options and instructions see the anchoring guide Page 13 www.creativestructures.nl...
- Page 15 Building instructions Lounger M tep 15: Attach the connecting lashing hooks to the four side panel corners Page 14 www.creativestructures.nl...
- Page 16 Building instructions Lounger M tep 16: Hook in the side panel by using the two upper lashing hooks Page 15 www.creativestructures.nl...
- Page 17 Building instructions Lounger M tep 17: Connect the two lower lashing hooks tep 18: Tension the side panel by tensioning the four lashing hooks Page 16 www.creativestructures.nl...
- Page 18 Building instructions Lounger M tep 19: Drape the upper and lower flap of the side panel to the outside of the structure The individual side panels can be connected to each other with the zippers Page 17 www.creativestructures.nl...
- Page 19 Building instructions Lounger M tep 19: Install the cover connection gutter (if desired) Connection gutter CS-0394 Hook in the gutter using the six hooks on the gutter Tension the gutter with the elastic cords on both ends Page 18 www.creativestructures.nl...
- Page 20 Building instructions Lounger M tep 20: Install the side panel connection panel by using the zippers (if desired) Connection panel CS-0396 Page 19 www.creativestructures.nl...
Need help?
Do you have a question about the Lounger M and is the answer not in the manual?
Questions and answers