Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Creative Structures Manuals
  4. Tent
  5. Crossover L
  6. Anchoring instructions

Creative Structures Crossover L Anchoring Instructions

Hide thumbs Also See for Crossover L:

Advertisement

Quick Links

Download this manual
Anchoring guide Crossover L
Version 2.1
www.creativestructures.nl

Advertisement

loading
Need help?

Need help?

Do you have a question about the Crossover L and is the answer not in the manual?

Questions and answers

Related Manuals for Creative Structures Crossover L

Summary of Contents for Creative Structures Crossover L

  • Page 1 Anchoring guide Crossover L Version 2.1 www.creativestructures.nl...

  • Page 2: Table Of Contents

    Anchoring guide Crossover L Contents Introduction 2.1 Anchoring with anchor pins 2.2 Anchoring with ballast 2.2.1 Anchoring Crossover L structure foot with ballast 2.2.2 Anchoring Crossover L structure feet with ballast 2.2.3 Anchoring three Crossover L structure feet with ballast 2.2.4 Anchoring...

  • Page 3: Introduction

    Anchoring guide Crossover L 1. Introduction For a safe use, the Crossover L has to be anchored to the ground surface properly. This guide provides multiple anchoring solutions with their requirements. Note: Creative Structures BV does not bear responsibility for the installation and foundation.
  • Page 4 Anchoring guide Crossover L Anchor point positions (Also available in digital dxf- and dwg-format) = Anchor point structure foot = Additional anchor point side panel. (Not necessary) Page 4 www.creativestructures.nl...

  • Page 5: Anchoring With Anchor Pins

    Anchoring guide Crossover L 2.1 Anchoring with anchor pins The Crossover L can be anchored to dense cohesive less soils (such as sand) or stiff cohesive soils (such as loam or clay) with 2 anchor pins per structure foot. Anchor pin dimensions: Page 5 www.creativestructures.nl...

  • Page 6: Anchoring With Ballast

    Anchoring guide Crossover L 2.2 Anchoring with ballast The Crossover L can be anchored with ballast by using the additional ballast system. It is possible to connect one, two, three or four structure feet at one anchor point. 2.2.1 Anchoring...
  • Page 7 Anchoring guide Crossover L Step 2 Mount the Crossover L structure foot with M12 screws. Screw connection DIN 933 M12x35 Step 3 Place twentyfour 50x50x4cm concrete tiles at both ballast supports and fasten them with lashings Concrete tile Lashings 50x50x4cm...

  • Page 8: Anchoring Two

    Anchoring guide Crossover L 2.2.2 Anchoring Crossover L structure feet with ballast Step 1 Slide the four ballast supports into the ballast interface and secure it with M12 screws. Ballast interface CS-0524 Screw connection DIN 912 M12x120 Ballast support CS-0522...
  • Page 9 Anchoring guide Crossover L Step 2 Mount the two Crossover L structure feet with M12 screws. Screw connection DIN 933 M12x35 Page 9 www.creativestructures.nl...
  • Page 10 Anchoring guide Crossover L Step 3 Place twentyfour 50x50x4cm concrete tiles at the four ballast supports and fasten them with lashings Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg Total weight: 600kg Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg...

  • Page 11: Anchoring Three

    2.2.3 Anchoring three Crossover L structure feet with ballast Step 1 See step 1 - Anchoring two Crossover L structure feet with ballast Step 2 Mount the three Crossover L structure feet with M12 screws. Screw connection DIN 933 M12x35 Page 11 www.creativestructures.nl...
  • Page 12 Anchoring guide Crossover L Step 3 Place twentyfour 50x50x4cm concrete tiles at the four ballast supports and fasten them with lashings Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg Total weight: 600kg Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg...

  • Page 13: Anchoring Four

    2.2.4 Anchoring four Crossover L structure feet with ballast Step 1 See step 1 - Anchoring two Crossover L structure feet with ballast Step 2 Mount the four Crossover L structure feet with M12 screws. Screw connection DIN 933 M12x35 Page 13 www.creativestructures.nl...
  • Page 14 Anchoring guide Crossover L Step 3 Place twentyfour 50x50x4cm concrete tiles at the four ballast supports and fasten them with lashings Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg Total weight: 600kg Concrete tile 50x50x4cm Concrete tile 50x50x4cm Total weight: 600kg...

  • Page 15: Anchoring At A Stage

    2.3 Anchoring at a stage The Crossover L can be anchored to a stage witch has a pitch of 2072mm (non metric). Therefore the anchor support (CS-0148) has to be removed. Connect the anchor slide (CS-0099) of the structure feet to the vertical tubes of the stage with staging equipment like rosets and wedge head couplers.
  • Page 16 Anchoring guide Crossover L Up to four Crossover units can be connected to the stage anchoring point Stage connection requirements table Anchor forces per structure feet (kN) 19,36 6,70 -4,39 A negative value for a vertical force means that the direction of the required vertical foundation force is downwards.