Heart Rate Measurement - Topcom HB 4M00 User Manual

12
There are 4 Heart rate alert zones, Zone 1 -4:
• Zone 1- 3 are predefined as shown in the table above:
Zone 1= Performance
Zone 2 = Fitness
Zone 3 = health
• Zone 4 can be user defined. See "Setting time/date, BEEP ON/OFF
and birthday" on page 5.

10.4 HEART RATE MEASUREMENT

In time mode:
• S4: To go to Heart rate mode.
• S3: To activate the heart rate measurement
• When heart rate is received from the belt the following will be showed:
- the heart rate in beats per minutes
- Percentage of estimated maximum heart rate MHR% ( = current HR/
MHR*100%)
After 5 minutes if no heart rate is received the watch will return to
Idle mode.
Not activated
heart rate is acquired
heart rate
(beats per minute)
Heart Rate Mode
After 3 sec
flashing
Activated
heart rate
(percentage of
estimated maximum
heart rate)
TOPCOM HB 4M00