Replacing A Power Supply - Sun Microsystems Storage J4200 Replacement Manual

▼ Replacing a Power Supply

Caution – Follow all ESD precautions (see
care when handling either the new or failed power supply.
1. Unpack the new power supply and do one of the following:
Place the failed power supply in the packing materials so that you can return it
■
to Sun for proper disposal.
Properly dispose of the failed power supply.
■
2. Insert a new power supply by holding its handle up and aligning it with the
open slot. (See
3. Slide the power supply into the tray.
4. Push the handle down to seat the power supply in the tray.
Replacing a Power Supply
FIGURE 4
Note – The latch tab holds the handle in place.
5. Plug the power cord into the new power supply.
.)
FIGURE 4
"ESD Precautions" on page
Removing and Replacing a Power Supply
1) and use
5