Canton Smart SUB 8 Short Manual page 22

English
Wireless connection with Smart Soundbox 3:
Note:
• Before connecting the Smart Sub 8 to the Smart Soundbar, please make sure
that the Smart Sub 8 is not connected to the power supply.
Press the input select button „
1
Use the „+" or „-" button to navigate to the Wireless Setup [WIS] menu and
2
press the „ " play/pause button to confirm.
Select Pair Wireless Speakers [WSP] and confirm with the Play/Pause button
3
„ ".
The Pair Wireless Speakers menu appears and [MFL] appears on the display
4
(MFL = Master Front Left).
Press the play/pause button „ ".
5
Use the „+" or „-" button to select the [SUB] subwoofer you want to pair.
6
Now press play/pause button
7
[PIR].
Connect the Smart Sub 8 you want to connect to the mains and switch it on.
8
Approximately 10 - 20 seconds after the subwoofer is turned on, the status
9
changes to „connected" and [CON] is displayed.
22
" for at least 3 seconds.
„ ". The status indicator will change to „Pair"