Canton Smart SUB 8 Short Manual page 20

English
Wireless connection with Smart Soundbar 9 / Smart Soundbar 10:
Note:
• Before connecting the Smart Sub 8 to the Smart Soundbar, please make sure that
the Smart Sub 8 is not connected to the power supply.
Press the „M" menu button on the Smart remote control to access the main
1
menu of the sound bar via the on-screen display on your TV set.
Use the „ " or „ " arrow button to navigate to the Wireless Setup [WIS] menu
2
and press the „OK" button to confirm.
Select the function Pair Wireless Speakers [WSP] and confirm with the „OK"
3
button.
Use the „ " or „ " arrow button to select the speaker you want to pair. In this
4
case, select [SUB] to pair the wireless subwoofer.
Now press the „OK" button. The status indicator will change to Pairing [PIR].
5
The screen displays „Pairing".
Now plug the power cord of the Subwoofer into the wall socket and switch it on
6
with the power switch.
Approximately 10 - 20 seconds after the subwoofer is turned on, the status
7
changes to „connected" and [CON] is displayed.
20