Maintenance - Novy Mood 7550 Operating And Installation Instructions

4. MAINTENANCE

4.1. Grease filter
Maintenance of the grease filter
The cooker hood contains 4 metal grease filters. The
cooker hood has a cleaning indicator for the grease fil-
ters.
Grease filter indication
Indication: green indicator lamp starts
burning.
After 20 cooking hours, an green lamp on the hood
indicates that the grease filter needs cleaning
Access to the filter
The two side panels can be opened.
Attention: hold the hood with one hand and
open the side panel with the other hand.
Remove the filter by taking hold of its hook and pulling
down.
Cleaning the filter:
• in the dishwasher
• manually: in a hot solution of water and a liquid de-
tergent. Rinse and allow to dry completely
The previous instructions need to be followed. If
not an increased fire hazard may occur.
After cleaning, place the grease filters back in the hood.
Do not use the hood without the grease filters.
Reset grease filter indication
When you replace the monoblock filters after clean-
ing, press the [+] and [-] buttons simultaneously for 5
seconds to reset the cleaning indicator. If you don't
reset, the green indication light will continu burn. We
advise you to clean your filter once a month for an opti-
mal operation.
4.2 Monoblock filters
The hood has 2 monoblock filters. Use just the Novy
monoblock filter in the hood.
Replacement indicator monoblock filter
Indication: orange indicator lamp starts
burning
After a fixed period of time, an orange light on the unit
indicates that the monoblock recirculation filter needs
to be changed.
Remove the Monoblock recirculation filter
When you replace the monoblock filters after cleaning,
press the [+] and [-] buttons simultaneously for 5 sec-
onds to reset the cleaning indicator. If you do not do
this, the green light will continue to shine when you turn
on the extraction hood.
A new monoblock filter can be obtained from a spe-
cialist dealer or from the Novy website.
Replacing the monoblock filter
Replace the monoblock filters in the provided open-
ings at the top of the hood. Slide the grilles back on
top of the monoblock filters (with the handle facing in-
wards).
Reset of the replacement indicator
When you replace the new monoblock filters, all you
have to do is press the [+] and [-] keys simultaneously
for 5 seconds to reset the replacement indicator.
If you do not do this, the orange indicator lights up
when the camera is turned on.
EN 20