Operation - Novy Mood 7550 Operating And Installation Instructions

3. OPERATION

In order to turn on the hood, the on/off switch must
be activated first. This is disabled for servicing the
device. The knob is located at the top on the side of
the connection cable.
3.1 Extraction
Switch on - switch off
To switch the motor on push button
always resume the level it was previously switched off
in (light and/ or motor).
Switch off with 30 minute delay
Press key once to set the run-out position. The light-
ing switches to atmosphere mode and the first white
engine speed LED flashes. The engine continues to run
for 30 minutes in post-ventilation mode. After this time,
the motor will switch off. The lighting will remain on in
the mood mode.
Switch off without delay
Push button twice.
Auto-Stop
To avoid that the hood will function during a too long
period, it will switch off automatically after 3 hours
(when no changes to the controls have been made).
Only the motor will turn off automatically. The lighting
will remain on in the mood mode.
Motor speed
In order to increase the speed of the motor, press the
button. In order to decrease the speed, press the
button . The motor speed can be set to 4 speeds.
You can select the required position depending on the
vapour production while cooking.
A self-rectifying thermal contact makes sure that
the motor is switched off when overheated. The mo-
tor will switch on again after is has cooled down. The
cause of the overheating needs to be determined. This
may be, for example, that the contents of the pan have
caught fire, the motor fan is blocked or an object is
(partly) closing off the exhaust opening.
1) Lighting cooking mode
on/off
2) increase speed levels
3) decrease speed levels
4) switch on / off
5) Novy button: mood mode
lighting on/off
. The hood will
3.2 Lighting
With respect to the lighting you can choose between
the cooking mode and the mood mode.
Cooking mode
The cooking mode provides optimum lighting for cook-
ing. By default, this mode has the maximum light in-
tensity. Press key or
mode on or off.
Mood mode light intensity
When the cooking mode is active, you can dim or inten-
sify the light by pressing
key when the required light intensity has been reached.
Change the colour temperature in the cooking mode
You can change the colour temperature into cold
light by simultaneously pressing keys
seconds. Release both keys when the required colour
temperature has been reached.
You can change the colour temperature into warm
light by simultaneously pressing keys
seconds. Release both keys when the required colour
temperature has been reached.
After having switched off the cooking mode, the last
set value will always be remembered. In this way your
preference will be used every time when switching on
the hood.
Mood mode
The mood mode provides optimum lighting for creating
a nice atmosphere. By default, this mode has a lower
light intensity than cooking mode. Press key 5 to switch
the mood mode on or off.
Mood mode light intensity
When the mood mode is active, you can dim or intensi-
fy the light by pressing and holding key 5. Release key
5 when the required light intensity has been reached.
Change the colour temperature in the mood mode
You can change the colour temperature into cold
light by simultaneously pressing keys 5 and
seconds. Release both keys when the required colour
temperature has been reached.
You can change the colour temperature into warm light
by simultaneously pressing keys 5 and
them for 4 seconds. Release both keys when the re-
quired colour temperature has been reached.
After having switched off the mood mode, the last set
value will always be remembered. In this way your pref-
erence will be used every time when switching on the
hood.
key to switch the cooking
and holding key . Release
and for 4
and for 4
for 4
and holding
EN 18