Program Key; Mode Key; Speed Button; Display Function - JMQ A6X Instruction Manual

Program key

"PROGAM" is the program key. In the standby state, press this
button to cycle through the manual mode to the automatic program
P1 – P12; the manual mode is the system default operation mode,
the manual mode default speed is 1.0, and the maximum running
speed is 12.8.

Mode key

"MODE" is the mode button. In the standby mode, press this
button to cycle through three different countdown modes of
operation from time, distance and calories. When selecting various
modes, you can use the speed plus or minus button to set the
relevant countdown value. After the setting is completed, press the
"START" button to start the treadmill.

Speed button

"SPEED+" and "SPEED -" are speed addition and subtraction keys:
they can be used to adjust the speed after the treadmill is started,
stepping 0.1Km/time, "SPEED+" and "SPEED -" can be used to
parameterize the treadmill to adjust the set value.

Display function

a. Speed display: Displays the current running speed value.
12