Playing Audio Via Bluetooth - Bush LUNAR Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

LUNAR

Operate Bluetooth

Pairing with Your Mobile Phone

Your DAB+ Bluetooth Speaker are connected to mobile phones using a procedure by

following a few simple steps, a mobile phone can be paired with the DAB+ Bluetooth

Speaker in a matter of seconds.

Setup Your DAB+ Bluetooth Speaker on BLUETOOTH mode

1. Power on the DAB+ Bluetooth Speaker.

2. Press the MODE button to BT mode and the Bluetooth show on and / PAIRING

flash the display.

3. Finish this simply setting and go to next step below.

Set your phone to 'discover' the your unit

1. First make sure that Bluetooth is activated on your mobile phone.

2. Then set your phone to discover your DAB+ Bluetooth Speaker.

3. This usually involves going to a 'setup,' 'connect' or 'Bluetooth' menu on your phone

and selecting the option to 'discover' or 'add' a Bluetooth device.

Using your phone to connect the DAB+ Bluetooth Speaker.-

1. Your phone will find the DAB+ Bluetooth Speaker under name "LUNAR".

2. Your phone then asks if you want to pair with the DAB+ Bluetooth Speaker.

3. Accept by pressing 'yes' or 'ok' on the phone.

4. Your phone will confirm when pairing is complete.

5. When successful pairing, the CONNECTED will light on display.

Warning!

In case of unsuccessful pairing, the NOT PAIRED will light on display.

You must follow the previous step "Operate Bluetooth" to setting again or hold the

button to manual connect again.