W&H assistina 301 plus Instructions For Use Manual page 18

Start-up
Check that the fleece inlay is damp to ensure correct function.
If it is not damp, repeat the process 2 to 3 times.
Dispose of saturated fleece inlays as with cloths for surface disinfection.
In the event of operating malfunctions (e.g., vibrations, unusual noise, overheating, failure or leakage) stop the medical
device immediately and contact an authorized W&H service partner.
18
Place a fleece inlay in the
waste disposal tray.
Close the cover and waste
disposal tray.
1 x
2 secs.
Press the start button once for
2 seconds.