Initial Filling - W&H assistina 301 plus Instructions For Use Manual

Start-up
If no fluid can be seen or detected on the waste disposal tray, the supply lines are not yet completely full.
10 x
2 secs.
> Do not connect any transmission instrument, turbine, air motor or dental scaler during the test!
> If the adaptor is fitted on the maintenance attachment, remove it.
Pull the drip guard off the
maintenance attachment and
store it safely.
Close the cover.
Press the start button
10 times for 2 seconds.
15 x
2 secs.

Initial filling

Press the start button about
15 times for 2 seconds with a
pause of 2 seconds between
each actuation.
17