Panasonic ES‑LV9QX Operating Instructions Manual page 14

Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger and
plug the adaptor into a
household outlet�
(See page 10�)
• Check that the charge status lamp
( ) is glowing.
• When the LOW lamp or the STATUS
lamp lights up, see page 18.
2
Press �
The CLEAN lamp and the DRY lamp glow, and the "AUTO"
mode will start after approximately 6 seconds.
• It is not possible to change the mode after the "AUTO" mode
has started.
Clean
10 min
* When the ambient temperature of the self‑cleaning recharger
is low (approx. 15 °C or lower): 170 min
3
Remove the adaptor after the selected mode is
completed�
Clean the shaver with water or with the cleaning
brush once per month. (See pages 15 and 16.)
The main unit neck section (a), inner blade
attachment part (b), trimmer, system outer foil
gaps, etc. cannot be cleaned with the self‑
cleaning recharger.
14
ES-LV9QX_ME.indb 14
1
1
2
Dry Charge
80 min* 0 to 60 min


Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver, and the
mode can be changed by pressing the SELECT button.
Charge mode AUTO mode
(Charge) (Clean/Dry/Charge)
Notes
• Do not press the cleaning liquid unit removal button during
cleaning as the cleaning liquid may spill causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under extreme low
temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so smooth
shave is maintained without applying oil.
Dry/Charge mode
(Dry/Charge)
3/6/2018 4:12:56 PM