Panasonic ES‑LV9QX Operating Instructions Manual page 13

When the battery capacity is low
"10%" appears and " " blinks.
The appliance beeps twice after switched off.
• You can shave 1 to 2 times after "10%"
appears. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• To prevent erroneous operation, place your fingers on the finger
rest while using the shaver.
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver is
not operating. (See page 15.)
You cannot shave in this mode.
ES-LV9QX_ME.indb 13
►Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to prevent
missed spots.
LOCK
You can lock the shaver head.
►Using the trimmer
1. Slide the trimmer handle up to the
" " position so that the trimmer
stands upright.
2. Press and use.
Press and hold the top knob (a) and
slide the trimmer handle down to lower
the trimmer.
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns
FREE
LOCK
FREE
LOCK
FREE
LOCK

Pre‑shave of long beards
13
3/6/2018 4:12:55 PM