Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ANTAIRA INJ-0200G-at-24 Series
Summary of Contents for ANTAIRA INJ-0200G-at-24 Series
- Page 1 Antaira Technologies - Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 INJ-0200G-at-24 Series Industrial Gigabit PoE+ Injector Injector – 1*10/100/1000Base-T(X) with PoE-PSE (30W/Port) + 1*10/100/1000Base-T(X), Booster Version Version 1.0 User Manual...
- Page 2 Trademark Information Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the registered trademarks of Wi-Fi Alliance.
- Page 3 Industrial Grade Gigabit PoE+ Injector User Manual Version 1.0 (May 2020) This manual supports the following models: • INJ-0200G-at-24 • INJ-0200G-at-24-T This document is the current official release manual. Please check our website (www.antaira.com) for any updated manual or contact us by e-mail (support@antaira.com).
-
Page 4: Table Of Contents
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 Table of Contents Overview ............... 1 Key Features ..........1 Package Contents ........2 Safety Precaution ........2 Hardware Description .......... 3 Physical Dimensions ........3 Front Panel ........ -
Page 5: Overview
PD device. PoE injector is a brilliant low-cost solution for the case that only one side of devices is supporting PoE function. Therefore, INJ-0200G-at-24 Series will be your best choice to deal with the lack of PoE function cases. -
Page 6: Package Contents
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 1.2 Package Contents 1 x Quick Installation Guide 1 x INJ-0200G-at-24(-T) 1 x Wall mounting brackets and screws 1 x DC cable - 18 AWG & DC jack 5.5x2.1mm 1.3 Safety Precaution... -
Page 7: Hardware Description
INJ-0200G-at-24 Series User Manual V1.0 2. Hardware Description 2.1 Physical Dimensions Figure 2.1, below, shows the physical dimensions of Antaira Technologies’ INJ-0200G-at-24 series: Industrial Gigabit PoE+ Injector (W x D x H) is 26mm x 95mm x 75mm Figure 2.1... -
Page 8: Front Panel
Figure 2.2 Front Panel of the INJ-0200G-at-24 Series 2.3 Top View Figure 2.3, below, shows the top panel of the INJ-0200G-at-24 series injector that is equipped with one 4-pin removal terminal block connector for dual 12-55VDC power inputs. Figure 2.3... -
Page 9: Led Indicators
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 2.4 LED Indicators There are LED light indicators located on the front panel of the industrial PoE Injector that display the power status and PoE status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.4. -
Page 10: Cabling
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 The table below shows the 10BASE-T/100BASE-TX MDI port pin outs. Pin MDI-X Signal Name MDI Signal Name Receive Data plus (RD+) Transmit Data plus (TD+) Receive Data minus (RD-) - Page 11 Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 Figure 2.7.1 Power Terminal Block 2. Tighten the wire-clamp screws to prevent the wires from loosening, as shown below in Figure 2.7.2 Figure 2.7.2 Power Terminal Block...
-
Page 12: Mounting Installation
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 3. Mounting Installation 3.1 DIN-Rail Mounting The DIN-Rail is pre-installed on the industrial PoE injector from the factory. If the DIN-Rail is not on the industrial PoE injector, please refer to Figure 3.1 to learn how to install the DIN-Rail on... -
Page 13: Wall Mounting
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 3.2 Wall Mounting Follow the steps below to mount the device using the wall mounting bracket as shown below in Figure 3.2. 1. Remove the DIN-Rail bracket from the device by loosening the screws. -
Page 14: Hardware Installation
Hardware Installation 4.1 Installation Steps This section will explain how to install Antaira’s INJ-0200G-at-24 series: Caution: This device is intended for use indoor and at altitudes up to 2000 meters. Caution: The device is intended to be installed in an industrial control enclosure and panel. -
Page 15: Maintenance And Service
Antaira Technologies – Industrial Gigabit PoE+ Injector INJ-0200G-at-24 Series User Manual V1.0 4.2 Maintenance and Service • If the device requires servicing of any kind, the user is required to disconnect and remove it from its mounting. The initial installation should be done in a way that makes this as convenient as possible. -
Page 16: Trouble Shooting
Antaira Customer Service and Support (Antaira US Headquarter) + 844-268-2472 (Antaira Europe Office) + 48-22-862-88-81 (Antaira Asia Office) + 886-2-2218-9733 Please report any problems to Antaira: www.antaira.com support@antaira.com www.antaira.eu info@antaira.eu www.antaira.com.tw info@antaira.com.tw Any changes to this material will be announced on the Antaira website.
Need help?
Do you have a question about the INJ-0200G-at-24 Series and is the answer not in the manual?
Questions and answers