PeakTech 3730 Manual page 34

You can obtain further information about the Battery Regulations
from the Bundesministerium für Umwelt, Naturschutz und
Reaktorsicherheit (Federal Ministry of Environment, Nature
Conservation and Reactor Safety).
6.2. Replacing the Fuse
WARNING !
To avoid electrical shock or arc blast, or personal injury or
damage to the Meter, use specified fuses ONLY in accordance
with the following procedure.
To replace the Meter's fuse:
1. Turn the Meter power off and remove all connections from
the terminals.
2. Remove the screw from the battery compartment, and
separate the battery compartment from the case
bottom.
3. Remove the screws from the case bottom, and separate
the case top from the case bottom.
4. Remove the fuse by gently prying one end loose, then take
out the fuse from its bracket.
Batteries, which contain harmful substances,
are marked with the symbol of a crossed-out
waste bin, similar to the illustration shown left.
Under the waste bin symbol is the chemical
symbol for the harmful substance, e.g. „Cd" for
cadmium, „Pb" stands for lead and „Hg" for
mercury.
-33-