Henden Salt and Mineral Chlorinator Owners Manual
Figure 4.10
> This screen shows the:
n current chlorine output setting (ie 100% shown);
n current time setting;
n current power status (ie ON shown).
5. TYPICAL (EVERYDAY) START-UP
Note: Once the unit starts there is a short time delay until the cell operates to ensure the filtration system is
primed with water.
• Every time the HSMC is turned on, the following screen is shown on start-up:
Figure 5.1
• The display then automatically reverts to the HOME screen:
Figure 5.2
16 | HENDEN INSTALLATION & OWNERS MANUAL
100% – 07:31 AM
AUTO ON
HENDEN
V1.2.7 AU 15L
100% – 07:31 AM
AUTO ON
Need help?
Do you have a question about the HSMC15 and is the answer not in the manual?
Questions and answers