Table of Contents
Advertisement
CONNECTING TO THE WEB INTERFACE
Connecting to the Web-Based User Interface
No special client software is required to remotely connect to the ARC, and the HTML-5-based GUI is
device, operating system, and browser agnostic. We recommend Google Chrome, Firefox, or Apple Safari.
The computer or tablet should be on the same network and subnet as the ARC.
Once ARC and your computer are connected to your network, enter the IP address of the ARC to which
you want to connect in the URL field of your browser. Once connected, the Home Screen will appear.
Clicking on the ARC logo (5A) in the top left corner will always return you to this screen.
Figure 5: Remote home screen
Multiple users can connect to the same ARC hardware simultaneously. Anyone connected to the unit will
be able to see the information on this screen including the unit's name (5B) and physical location (5C).
Additionally, all users can access Meters screen (5D) which shows loudness measurements and input/
output levels for both programs. See the section "ARC Home Screen When Logged In" below for detailed
information.
The Locate Unit feature (5E), which causes the front panel display of the unit to flash for easy
identification in a crowded rack, can also be activated without logging in.
Additional information about installed options, clock sync, network status and IP address, power supply
status, software and FPGA versions, and unit uptime are displayed to the right of the screen (5F).
Advertisement
Table of Contents
