Philips SpeedPro Aqua FC6728 Manual page 13

Problem
The output of water is
faster and larger than
normal.
The floor dries with stripes
when I use the water tank.
Possible cause
You use a microfiber
mopping pad that is not
supplied by Philips.
If the water tank produces an
uncontrolled and too large
amount of water, the cap of
the tank is probably not
closed properly.
The strip is not placed
properly in the bottom of the
water tank.
You added too much liquid
cleaner to the water.
Solution
Only use an original Philips microfiber
mopping pad. You can buy these
mopping pads in the online Philips shop
at www.philips.com/parts-and-
accessories or at your Philips dealer. You
can also contact the Philips Consumer
Care Center in your country (see the
international warranty leaflet for contact
details).
Check the cap and make sure it is fully
and properly closed.
Check the strip and make sure that it is
fitted properly in the bottom plate of the
water tank.
Use only a few drops or use a cleaner
that foams less.
English
15