Advertisement
Quick Links
Advertisement
Related Manuals for Ness 101-090
Summary of Contents for Ness 101-090
- Page 1 101-090 101-076 101-080 101-079 Quick Guide PROX READER / PIN KEYPAD...
- Page 3 Hook-up Diagram for Ness Access Control Module for the M1...
- Page 4 Enter Program mode Factory Default: Press the # key 4 times 1234 (Transmit LED will turn off and Program LED will turn red.) Enter your 4-digit installer code (Default: 1234) Exit Program mode Press # at any time to exit programming mode (or if no buttons are pressed it will exit programming mode) Selecting keypad transmission format Note:...
- Page 5 Set a new Program code Enter Program Mode Press 3 - (the transmit LED will turn red) Enter your new 4-Digit programming code Once your programming code has been entered then it will exit programming mode automatically. - (Transmit LED will turn red) Changing the facility code Note: Enter Program Mode...
- Page 6 101-090 101-076 101-080 101-079 Quick Guide PROX READER / PIN KEYPAD...
- Page 8 Hook-up Diagram for Ness Access Control Module for the M1...
- Page 9 Enter Program mode Factory Default: Press the # key 4 times 1234 (Transmit LED will turn off and Program LED will turn red.) Enter your 4-digit installer code (Default: 1234) Exit Program mode Press # at any time to exit programming mode (or if no buttons are pressed it will exit programming mode) Selecting keypad transmission format Note:...
- Page 10 Set a new Program code Enter Program Mode Press 3 - (the transmit LED will turn red) Enter your new 4-Digit programming code Once your programming code has been entered then it will exit programming mode automatically. - (Transmit LED will turn red) Changing the facility code Note: Enter Program Mode...
Need help?
Do you have a question about the 101-090 and is the answer not in the manual?
Questions and answers