Page 1
When the steamer has heated up and is ready for use, the blue light will stop flashing. There is no water (or low water level) in the tank If the tank is empty, your Philips Garment Steamer will not be able to produce steam. Please refill the water tank.
Page 2
Too much scale has built up in the stand steamer When scale builds up in your Philips Stand Steamer, it might not be able to produce steam. Please perform the de-calc process detailed in the following lines: 1) Switch off and unplug your stand steamer and allow it to cool down for an hour.
Page 3
To prevent this, please hold your handheld steamer vertically while using it. The information on this page applies to the following models: GC558/36 , GC442/67 , GC330/47 My Philips Garment Steamer leaves stains on...
Page 4
My Philips iron or garment steamer causes a power failure on mains If your Philips iron or your garment steamer causes a power failure, find out here what you can do to solve the issue. The iron/steamer is not properly plugged in Check if the connection to the household power is loose or not properly plugged in.
Page 5
My Philips stand garment steamer produces a croaking sound Find out what could be causing a croaking sound coming from your Philips stand garment steamer below. The head or hose is horizontally positioned When the hose is horizontal, condensation in your steamer’s hose might not flow back into the...
Page 6
The hose is forming a U shape Condensation might not be able to flow into the water tank if your stand steamer’s hose is forming a U shape. A croaking sound can be produced because of this. If this is the case, please re-position the hose, making sure it is straight, and lift up the head so condensation can flow back into the tank.