Download
Share
Print this page
Arrow Storage Products BGR1210FG Owner's Manual & Assembly Instructions
  1. Manuals
  2. Brands
  3. Arrow Storage Products Manuals
  4. Outdoor Storage
  5. BGR1210FG
  6. Owner's manual & assembly instructions

Arrow Storage Products BGR1210FG Owner's Manual & Assembly Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Assembly Instructions
BW01b
726260919
Storage Area:
12'x10'
12'x17'
12'x24'
12'x31'
BUILDING DIMENSIONS
*Approx.
Size
12' x 10'
141 1/8" x 111 3/4"
12' x 17'
141 1/8" x 198"
12' x 24'
141 1/8" x 284 1/4"
12' x 31'
141 1/8" x 370 1/2"
3,7 m x 3,0 m
358,5 cm x 283,8 cm
3,7 m x 5,2 m
358,5 cm x 502,9 cm
3,7 m x 7,3 m
358,5 cm x 722,0 cm
3,7 m x 9,4 m
358,5 cm x 941,1 cm
Model No.
Missing Parts, Questions on Assembly?
Call: 1-800-851-1085 or assist@arrow-
Do not return to dealer, they are not
equipped to handle your requests.
110 Sq. Ft.
801 Cu. Ft. (10,2 m
194 Sq. Ft. 1419 Cu. Ft. (18,0 m
278 Sq. Ft. 2037 Cu. Ft. (25,8 m
362 Sq. Ft. 2655 Cu. Ft. (33,6 m
* Size rounded o to the nearest foot
Base
Size
146 1/8"
146 1/8"
146 1/8"
146 1/8"
371,2 cm
371,2 cm
371,2 cm
371,2 cm
BGR1210FG
BGR1224FG
sheds.com
22,7 m
2
3
)
40,2 m
2
3
)
57,7 m
2
3
)
75,2 m
2
3
)
Exterior Dimensions
(Roof Edge to Roof Edge)
Width
Depth
Height
117"
103 1/4"
203 1/4"
103 1/4"
289 1/2"
103 1/4"
375 3/4"
103 1/4"
297,2 cm
262,3 cm
516,3 cm
262,3 cm
735,3 cm
262,3 cm
954,4 cm
262,3 cm
BGR1217FG
BGR1231FG
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS
PIECES TO AVOID A MISHAP. FOR SAFETY SAKE,
PLEASE READ SAFETY INFORMATION PROVIDED IN
THIS MANUAL BEFORE BEGINNING CONSTRUCTION.
WEAR GLOVES WHEN HANDLING METAL PARTS.
Interior Dimensions
(Wall to Wall)
Width
Depth
141 1/8"
111 3/4"
141 1/8"
198"
141 1/8"
284 1/4"
141 1/8"
370 1/2"
358,5 cm
283,8 cm
358,5 cm
502,9 cm
358,5 cm
722,0 cm
358,5 cm
941,1 cm
Height
102"
102"
102"
102"
259,1 cm
259,1 cm
259,1 cm
259,1 cm

Advertisement

loading

Related Manuals for Arrow Storage Products BGR1210FG

Summary of Contents for Arrow Storage Products BGR1210FG

  • Page 1 Owner's Manual & Assembly Instructions BW01b Model No. BGR1210FG BGR1217FG BGR1231FG BGR1224FG Missing Parts, Questions on Assembly? Call: 1-800-851-1085 or assist@arrow- sheds.com Do not return to dealer, they are not equipped to handle your requests. 726260919 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE 110 Sq.
  • Page 3 BEFORE YOU BEGIN..BW02 Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model.

  • Page 4: Tools And Materials

    PLAN AHEAD..BW04 Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building.
  • Page 5 SAFETY FIRST..Safety precautions are important to follow throughout the construction of your building. •Care must be taken when handling various •Practice caution with the tools being used in pieces of your building since some contain the assembly of this building. Be familiar with sharp edges.
  • Page 6 CARE & MAINTENANCE..BW05 Finish: For long lasting nish, periodically clean and wax the exterior surface. Touch-up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom.
  • Page 7 ACCESSORIES..BW06 Web ANCHOR KITS TOOL HANGING RACK Model No. AK4 Model No. TH100 Anchor Kit contains heavy-duty steel The perfect tool organizer. Twin augers, 60' (18 m) of steel cable and 25 1/2" (64,8 cm) steel channels 4 cableclamps. No digging or concrete plus ve heavy-duty snap-in pouring, just insert cable under roof, hangers and a small tool holder for...

  • Page 8: Special Note

    ORDERING ACCESSORIES..02/13 We recommend that you purchase accessory items from your local storage building dealer whenever possible; however, because the full line of accessories is not always available from all dealers, Arrow is o ering them to you on a direct basis. There are two ways to order Arrow Storage Building Accessories: Option 1 Option 2...
  • Page 9 Base BW08 The Base For Your Building Concrete Slab The slab should be at least 4" (10,2 cm) thick. It must be level and at to provide good support for the frame. The following are the recommended materials for your base. 2 x 4's (38 mm x 89 mm) (will be removed once the concrete cures) Concrete Sheet of 6 mil plastic We recommend for a proper strength concrete to use a mix of:...
  • Page 10 Anchoring BX10 Anchoring Down The Building It is important that the entire oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood/Post: Arrow Anchoring Kit: (Model No. AK4 or 60298) Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) Recommended for use with any suggested base.
  • Page 11 Hardware for Building BW11a 65943 65004 65101 65106 #10-32x7/16" (11 mm) Bolt (194) #8Ax5/16" (8 mm) Screw (403) 1/4-20 Square Nut (12) #10-32 Square Nut (200) (184) (Carton 4) (190) (Carton 4) (Packed with Screws) (184) (Carton 4) Remove from bag of screws and save for Step 28 65989 65900A...

  • Page 12: Parts List

    Parts List BW12 Carton #4 of the 12' x17' (3,6 m x 5,0 m) can be deleted for a complete 12' x10' (3,6 m x 2,8 m) building, or more than one carton #4 may be used to extend depth in mul- tiples of 7' (2,2 m).
  • Page 13 Assembly by Key No. BW13 CORNER WALL PANEL MAIN WALL PANEL...
  • Page 14 01FF Components for Door #3 End Hinge #2 End Hinge #1 End Hinge #1 Center Hinge Door Section with Door Section weather stripping Roller Inside Step Plate Door Lock Assembly Bottom Bottom Fixture Left Fixture Fixture Right...
  • Page 15 02FF Components for Door Snap Latch Snap Latch Keeper Cable Vertical Track Flag Angle Flag Angle Left Right Horizontal Curve Horizontal Curve Track Right Track Left Track Bracket Safety Spring Extension Spring Cable Cable Cable Clip Pulley S Hook Clevis...
  • Page 16 03FFa Hardware for Door 1/4” Sheet 10-24 x 5/8” Hex Bolt with Metal Screw Bolt Hole 1/4” Self 1/4” Self 1/4” Wiz Nut Drilling Screw Drilling Screw 3/8” x 3/4” Carriage Bolt 3/8” x 1-1/2” Bolt 1/4” x 5/8” Track Bolt &...
  • Page 17 7855 Truss Lower Chord (2) Parts Needed For 7856 Truss Upper Chord (2) Step 1 Truss Assembly 12x17, 12x24 & 12x31 6382 Center Gable Brace (8) 7739 Truss Diagonal (4) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) ONLY 6381 Mid Gable Brace (4) BW14 6380 Outer Gable Brace (4)
  • Page 18 Step 2 6381 Mid Gable Brace (4) Parts Needed For 6380 Outer Gable Brace (4) Gables All Sizes 7942 Right Gable (2) BW15 7943 Left Gable (2) The gables go on top of the front and rear walls to support the roof beams. The gables are packed nested to- gether and might be mistaken as 1 piece.
  • Page 19 8532 Right Rear Frame (1) Parts Needed For 8531 Left Rear Frame (1) Step 4 7837 Side Frame (2) Floor Frame Assembly 7834 Right Front Frame (1) 7835 Left Front Frame (1) BW16 12x10 (3,7 m x 3,0 m) 7517 Lower Door Track (1) 7560 Ramp (1) Position oor frames as shown Select location of side door...
  • Page 20 Parts Needed For 8532 Right Rear Frame (1) 7837 Side Frame (2) Step 5 8531 Left Rear Frame (1) 7834 Right Front Frame (1) Floor Frame Assembly 7914 Side Frame (see below) 7835 Left Front Frame (1) 12x17, 12x24 & 12x31 7857 Truss Support (see below) 7517 Lower Door Track (1) BW17...
  • Page 21 Step 6 7824 Corner Wall Panel (4) Parts Needed For 7825 Front Wall Panel (2) Corners All Sizes 7822 Main Wall Panel (2) BW18 Each screw and bolt in the wall re- Narrow quires a washer. Side 7824 Wide Side REAR 7824 CORRECT...
  • Page 22 Rear Frame Assembly (1) 7834 Right Front Frame (1) Step 7 Parts Needed For 7835 Left Front Frame (1) 7837 Side Frame (2) Frames 12x10 (3,7 m x 3,0 m) 7950 Side Wall Channel (1) BW19 7949 Side Wall Channel (1) 7951 Support Channel (1) The mid frame pieces give rigidity to Fasten side frame to the corner...
  • Page 23 Parts Needed For Step 8 Rear Frame Assembly (1) 7914 Side Frame (see below) 7834 Right Front Frame (1) 7837 Side Frame (2) Frames 7835 Left Front Frame (1) 6228 Frame Support (4) 12x17, 12x24 & 12x31 7917 Truss Column (see below) 7949 Side Wall Channel (1) BW20 7951 Support Column (1)
  • Page 24 7839 Front Column (2) Step 9 7834 Right Front Frame (1) Parts Needed For 7835 Left Front Frame (1) 7831 Lintel (1) Frames 12x10 (3,7 m x 3,0 m) Rear Frame Assembly (1) BW21 7838 Side Top Angle (2) 7958 Door Track (1) The top frame pieces give rigidity to Fasten side top angles to the the side walls and provide a surface...
  • Page 25 Parts Needed For 7839 Front Column (2) Rear Frame Assembly (1) Step 10 7834 Right Front Frame (1) 7915 Side Top Angle (see below) Frames 7835 Left Front Frame (1) 7838 Side Top Angle (2) 12x17, 12x24 & 12x31 7831 Lintel (1) 7958 Door Track (1) BW22 (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m)
  • Page 26 Step 11 Parts Needed For 7822 Main Wall Panel (see below) Walls All Sizes 7823 Medium Wall Panel (1) BW23 Each wall panel has a crimped rib on 1 side. The crimped rib should go IF YOU ARE BUILDING A 12x24 (3,7 m x 7,3 m) under the rib of the panel that follows Install 3 additional main wall panels on each side of the building.
  • Page 27 7517 Lower Door Track (1) Step 12 Parts Needed For 7560 Ramp (1) 8530 Splice Channel (1) Rear Entry Door All Sizes 7951 Support Column (1) BW24 7958 Door Track (1) Using the previous side entry door Position door track to the inside steps and this illustration, you can of the rear frame, butted up against install the entry door at 2 locations...
  • Page 28 7946 Door Jamb (2) Step 13 7948 Door Wall Brace (1) Parts Needed For 7972 Door Handle Lock Bracket (1) Side or Rear Entry Door All Sizes BW25 The door jambs reinforce the door opening and provide an attractive trim. Follow these steps for both door 7/8"...
  • Page 29 Step 14 Parts Needed For 10460 Right Track Support (1) 10461 Left Track Support (1) Track Supports All Sizes BW26 Fasten right and left track sup- ports to the front columns using 5 bolts from the inside and nuts outside. NOTE Flanges on track supports must face towards front of building.
  • Page 30 Right Gable Assembly (1) Parts Needed For Step 16 10462 Roof Beam (4) Roof Beams 12x17, 12x24 & 12x31 Left Gable Assembly (1) 6382 Center Gable Brace (1) 10462 Roof Beam Assembly (1) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) 6372 Gable Strut (2) BW27 Lift and fasten a right gable as-...

  • Page 31: Door Track

    Right Gable Assembly (1) Step 17 Parts Needed For Left Gable Assembly (1) 7912 Roof Beam (4) Roof Beams 12x17, 12x24 & 12x31 6382 Center Gable Brace (1) 7912 Roof Beam Assembly (1) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) 6372 Gable Strut (2) BW28 Fasten gables to rear frame using...
  • Page 32 Parts Needed For Right Gable Assembly (2) Step 18 Left Gable Assembly (2) Roof Beams 12x10 6382 Center Gable Brace (2) 10462 Roof Beam (4) (3,7 m x 3,0 m) 10462 Roof Beam Assembly (1) 6372 Gable Strut (2) BW29 Lift and fasten a right gable as- Join left and right gables together Fasten a gable strut to the middle...
  • Page 33 Step 19 Squaring the Building All Sizes BW30 Square the building on the foun- dation and at the top, by measuring diagonally from corner to corner as previously done. Use string to check and see if the sides and rear of building are straight, NOTE not bowed inward or outward.
  • Page 34 Step 20 Parts Needed For 7826 Right Roof Panel (2) Corner Roof Panels All Sizes 7827 Left Roof Panel (1) BW31 Install the left roof panel for the right Installing the roof panels is best done side in the position shown. Remove with a step ladder.
  • Page 35 Parts Needed For Step 21 Roof Panels 12x10 7828 Middle Roof Panel (2) (3,7 m x 3,0 m) BW32 Position middle roof panel over- MIDDLE ROOF PANEL lapping rib of left corner roof panel. Fasten overlap at center of roof panel SCREWS TO ROOF BEAM rib using a bolt and nut.
  • Page 36 Parts Needed For Step 22 7828 Middle Roof Panel Roof Panels 12x17, 12x24 & 12x31 (see below) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) BW33 IF YOU ARE BUILDING A 12x24 (3,7 m x 7,3 m) Position middle roof panel over- Cut 12 - 2"...
  • Page 37 7828 Middle Roof Panel (2) Step 23 Parts Needed For 7843 Ridge Cap (1) Ridge Caps 12x10 (3,7 m x 3,0 m) 7827 Left Roof Panel (1) 6874 Ridge Cap (1) BW34 Temporarily remove right rear roof panel. Install 2 middle roof panels. Fas- ten 2nd roof panel rib overlaps with a bolt and nut.
  • Page 38 Step 24 Parts Needed For 7828 Middle Roof Panel (see below) 7843 Ridge Cap (see below) Ridge Caps 12x17, 12x24 & 12x31 7827 Left Roof Panel (1) 6874 Ridge Cap (1) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) BW35 Install the right and left roof Continue weather stripping and...
  • Page 39 5220 Side Roof Trim (2) Step 25 Parts Needed For 6014 Side Roof Trim (2) Trim 12x10 (3,7 m x 3,0 m) 7846 Right Rake (2) 7845 Left Rack (2) BW36 Attach the side roof trim to the Fasten roof panel rib, rake, peak lower end of the roof panels on each cap and ridge cap together using bolts side of the building using screws at...
  • Page 40 5220 Side Roof Trim (see below) Step 26 Parts Needed For 6014 Side Roof Trim (2) 7845 Left Rack (2) Trim 12x17, 12x24 & 12x31 7846 Right Rake (2) (3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) BW37 Attach the side roof trim to the lower end of the roof panels on each...
  • Page 41 Step 27 10474 Door (1) Parts Needed For 3719 Door Handle Brace (1) Side or Rear Entry Door All Sizes 7947 Vertical Door Brace (1) 10497 Horizontal Door Brace (2) BW38 NOTE To assemble door to slide from left to right (opening), position door with handle holes on left side of door.
  • Page 42 Step 28 Parts Needed For Door Assembly (1) Side or Rear Entry Door All Sizes BW39 From inside the building, put the bottom of the door behind door jamb into the lower door track. Position the top of the door so that the holes in the door line up with the holes in the door slides.

  • Page 43: Step 29: Bottom Panel

    04FFa Step 29: Bottom Panel You will need for this page: 1/4” Sheet Metal Bottom Door Inside Step Plate Screw Section Bottom Gripping Point/Step Plate Kit Look for the section with weather seal attached to it. This is the bottom section. Set it on table face down (the face is the outside of the door).
  • Page 44 05FF Step 29: Bottom Panel You will need for this page: 1/4” Sheet Metal 1/4” Self Drilling Bottom Fixture Bottom Fixture #1 Center Hinge #1 End Hinge Roller Screw Screw (Red) Right Left Roller Sections are attached to each other with hinges. Fasten Carrier hinges marked #1 to top of bottom section at each stile us- ing (2) 1/4”...
  • Page 45 06FF Step 30: #2 Panel You will need for this page: 10-24 x 5/8” #2 Door Section Door Lock Assembly Bolt Drill three 1/2” holes into the section face. Drill completely through the section for the middle hole. Install lock assembly in section. #2 Section lock/outside handle...
  • Page 46 07FF Step 30: #2 Panel You will need for this page: 1/4” Self Drilling Snap Latch Screw Attach a snap latch assembly to each end stile using two 1/4” self drilling screws. #2 Section 1/4” self drilling screw snap latch 1/4”...
  • Page 47 08FF Step 30: #2 Panel You will need for this page: 1/4” Sheet Metal #1 Center Hinge #2 End Hinge Roller Screw Fasten end hinges marked #2 to top of section on each end stile. Use (2) 1/4” sheet metal screws per hinge.
  • Page 48 09FF Step 31: #3 Panel You will need for this page: 1/4” Sheet Metal #1 Center Hinge #3 Door Section #3 End Hinge Roller Screw Fasten end hinges marked #3 to top of section on each end stile. Use (2) 1/4” sheet metal screws per hinge.

  • Page 49: Step 32: Track Installation

    10FFa Step 32: Track Installation You will need for this page: 1/4” x 5/8” Track 6.5 Track 5.5 Track Flag Angle Right Flag Angle Left Bolt & Hex Nut Vertical Track Bracket Bracket Prepare the Vertical Tracks. The top of the vertical track must pitch back from the jamb for door to seal properly. This spacing is set by use of graduated track brackets.
  • Page 50 11FF Step 32: Track Installation You will need for this page: 1/4-20x1/2” Hex 1/4-20 Square 1” Washers Head Bolt Fasten the vertical track and fl ag angle assembly to the door jamb using 1/4” Bolt and Hex Nut with 1” Washer. Follow the orientation as shown below. Do this for both the right and left vertical tracks. 1”...
  • Page 51 12FF Step 33: Insert Panels You will need for this page: Assemblies from Step 29: • Bottom Panel Subassembly Insert the bottom section into the doorway. Slide the rollers into the vertical track as shown. Center and level bottom section in opening. If there is a gap on one end at the fl...
  • Page 52 13FF Step 33: Insert Panels You will need for this page: Assemblies from Step 30: • #2 Panel Subassembly Stack #2 section (with #2 end hinges) on top of bottom (#1) section while sliding rollers into vertical track. #2 Panel Assembly Roller Vertical...
  • Page 53 14FF Step 33: Insert Panels You will need for this page: 1/4” Sheet Metal Screw Attach the #1 end hinges and center hinge to the #2 section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 54 15FF Step 33: Insert Panels You will need for this page: Assemblies from Step 31: • #3 Panel Subassembly Stack #3 section (with #3 end hinges) on top of #2 section while sliding rollers into vertical track. #3 Panel Assembly Roller Vertical Track...
  • Page 55 16FF Step 33: Insert Panels You will need for this page: 1/4” Sheet Metal Screw Attach the #2 end hinges and center hinge to the #3 section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 56 17FF Step 34: Snap Latch Keeper You will need for this page: 1/4” x 5/8” Track Snap Latch Bolt & Hex Nut Keeper Attach a snap latch keeper to each vertical track using a bolt and nut. right hand vertical track #2 Panel Assembly snap latch keeper...
  • Page 57 18FFa Step 35: Thread Cable You will need for this page: Hex Bolt with 1/4” Wiz Nut Cable Hole Insert cable through left snap latch hole. Place a lug on the end of the cable to prevent it from sliding out. snap latch left hand vertical track...
  • Page 58 19FF Step 36: Horizontal Track You will need for this page: 7913 Spring Support #10-32x7/16 #10-32 Square Bracket Bolt Attach the spring support bracket to the back of the right roof beam using two bolts and square nuts. Right Roof Beam #10-32 Square Nuts #10-32x7/16 Bolt...
  • Page 59 20FF Step 36: Horizontal Track You will need for this page: 7913 #10-32 Square Spring Support #10-32x7/16 Bracket Bolt Attach the spring support bracket to the back of the left roof beam using two bolts and square nuts. Left Roof Beam #10-32 Square Nuts #10-32x7/16 Bolt...
  • Page 60 21FF Step 36: Horizontal Track You will need for this page: 3/8” x 3/4” Carriage 1/4” x 5/8” Track Left Horizontal Right Horizontal Bolt and Hex Nut Bolt & Hex Nut Curve Track Curve Track Have another person hold the end of the Fasten angle (attached to horizontal curve left horizontal curve track.
  • Page 61 22FF Step 36: Horizontal Track You will need for this page: 1/4-20x1 1/2” 1/4-20 Hex Head Bolt Square Nut Attach the end of the Left Horizontal Curve Track to the Spring Support Bracket using a long bolt and hex nut as shown. Repeat for Right Horizontal Track.
  • Page 62 23FF Step 37: Insert Top Panel You will need for this page: Top Door Section Assembling the top door panel will require another person holding the door section while attaching the fi xtures and hinges. Make sure adequate help is available before continuing on with the installation.
  • Page 63 24FF Step 37: Insert Top Panel You will need for this page: 1/4” Sheet Metal Top Fixture Roller Screw Place a roller inside of a top fi xture. Roller Fixture Slide the roller into the horizontal track where it is wide enough to put the roller as shown.
  • Page 64 25FF Step 37: Insert Top Panel You will need for this page: 1/4” Sheet Metal Screw Top Fixture Roller Place another roller into the other top fi xture. Section Fixture Roller Slide the roller into the horizontal track where it is wide enough to put the roller as shown.
  • Page 65 26FF Step 37: Insert Top Panel You will need for this page: 1/4” Sheet Metal Screw Attach the #3 end hinges and center hinge to the top section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 66 27FF Spring Assembly Preparation Check all spring assembly instructions and parts. Warning! If there appears to be any parts missing stop here and contact your Arrow Customer Service im- mediately. Do not substitute parts. Warning! Do not remove any factory applied spring tag or warning label! If any tags or labels are missing or unreadable, contact your Arrow Customer Service immediately.

  • Page 67: Reverse Side

    28FF Step 38: Extension Spring Assembly You will need for this page: 3/8” x 1-1/2” Bolt and Hex Nut Pulley Pulley Attach pulley with a 3/8” x 1-1/2” bolt and hex nut on 3/8” x 1-1/2” Bolt angle which attaches horizontal track to fl ag angle. Repeat this step for opposite side of door.
  • Page 68 29FF Step 38: Extension Spring Assembly You will need for this page: 3/8” x 1-1/2” Bolt Extension S Hook Safety Cable Pulley Clevis and Hex Nut Spring Assemble spring as shown. Bolt a clevis and pulley on one end Clevis S Hook 3/8”...
  • Page 69 30FF Step 38: Extension Spring Assembly You will need for this page: Spring Cable Attach spring cable loop to bottom fi xture stud and thread spring cable over pulley Spring Cable Loop Pulley Thread spring cable around spring pulley. Spring Bottom Pulley Fixture Stud...
  • Page 70 31FF Step 38: Extension Spring Assembly You will need for this page: S Hook Cable Clip Tie a cable clip to the spring cable and connect it to an S-hook. Cable Clip Spring Cable Stretch spring 2”-3” and clip the S-hook to a hole in the horizontal angle.
  • Page 71 32FF Step 38: Extension Spring Assembly Safety Cable Cable Knot Tie the safety cable securely to the horizontal curve track as shown. Horizontal Curve Track Repeat steps 4 through 11 for the other spring. Lowering the door and spring adjustment. Warning! Until all adjustments are completed, always assume you will have to physically support the full weight of the door.
  • Page 72 Step 39 Parts Needed For 7830 Right Door Jamb (1) Front Door Jambs All Sizes 7829 Left Door Jamb (1) BW42 Position right and left door jambs to right and left track supports with notched end on top, facing inside building.
  • Page 73 BGR1210FG BGR1217FG BGR1224FG BGR1231FG BW44b SOME FACTS ABOUT RUST 1. Avoid nicking or scraping the coating surface, Rusting is a natural oxidizing process that occurs inside and out. when bare metal is exposed to moisture. Problem areas include screw holes, unfinished edges, or 2.

This manual is also suitable for:

Bgr1217fgBgr1224fgBgr1231fg