Cisco Catalyst 9200 Series Installing Manual page 5

Installing a Network Module
Figure 2: Network Module Serial Number Location
Installing and Removing Pluggable Transceiver Modules
Installing a Cisco Pluggable Transceiver Module
Before you begin
See the switch release notes on Cisco.com for the list of supported a Cisco pluggable transceiver modules
(SFP, SFP, SFP28 and QSFP+ modules). Use only supported modules on the switch. For the latest information
about the supported modules, refer to the
For information about installing, removing, cabling, and troubleshooting transceiver modules, see the module
documentation that shipped with your device.
Warning Class 1 laser product. Statement 1008
• Do not remove the dust plugs from the transceiver modules or the rubber caps from the fiber-optic cable
• Removing and installing a transceiver module can shorten its useful life. Do not remove and insert any
until you are ready to connect the cable. The plugs and caps protect the module ports and cables from
contamination and ambient light.
module more often than necessary.
Installing and Removing Pluggable Transceiver Modules
Cisco Transceiver Modules Compatibility
Installing a Network Module
Information.
5