Setting Functions; Basic Methods Of Use; Main Setting Functions; Setting/[Media] Button - Korg XE20 Owner's Manual

Basic methods of use

The basic methods of using the SETTING functions are shown
below.
1.
Press the SETTING/[MEDIA] button.
This will enter the SETTING functions, and
blink on the display.
1 4
2.
Press the CATEGORY button t/u and select the
parameter to set.
3.
Turn the dial to select a value.
4.
After you are finished, press the [SHIFT] button to return
to the previous mode.

Main SETTING functions

Changing the auto power-off function
This instrument has an auto power-off function that
automatically turns off the power when the unit has not been
played or operated for a certain length of time. The time interval
is set to 30 minutes at factory default, but this can be changed.
1.
In the SETTING functions, press the CATEGORY button
t/u several times to select "P23:Auto PowerOff".
2.
Turn the dial to select "Disable" or a specific time after
which the power will turn off.
3.
Press the [SHIFT] button to return to the previous mode.
Changing the pedal polarity
If the pedal connected to the FOOT CONTROLLER jack does
not sustain the sound even when pressed, and if the sound
sustains when you take your foot off the pedal, you will need to
change the pedal polarity on this instrument.
1.
In the SETTING functions, press the CATEGORY button
t/u several times to select "P03:Pedal Polarity".
2.
Turn the dial to change the polarity.
− (KORG): This is the factory default setting. Use this setting
when using a DS-1H, PS-1 or PS-3 pedal.
+ (Reverse): Use this setting when the effect of the pedal
appears to be reversed.
3.
Press the [SHIFT] button to return to the previous mode.

SETTING functions

Changing the pedal function
Change the pedal function on this instrument to match the type
of pedal connected, whether a pedal switch, expression pedal or
volume pedal.
1.
will
2.
3.
3
4.
2
Connect the pedal to the FOOT CONTROLLER jack.
In the SETTING functions, press the CATEGORY button
t/u several times to select "P02:Pedal Function".
Turn the dial to select the pedal function.
No Assign: Use this when you are not using a pedal.
Damper: This is the factory default setting. Select this when
using a damper pedal or a pedal switch like the Korg DS-
1H, PS-1 or PS-3.
Expression: Select this when using a expression pedal like
the Korg EXP-2.
Press the [SHIFT] button to return to the previous mode.
25
SETTING functions