Media Functions; Connecting And Removing Usb Flash Drives; Basic Method Of Use - Korg XE20 Owner's Manual

28

MEDIA functions

Connecting and removing USB flash drives

1.
Turn off the power.
2.
Connect a USB flash drive (commercially available) to the
USB TO DEVICE port.
Make sure that the USB flash drive is facing the right
direction when you insert it. If you try to push the drive in
the wrong way too hard, the port on the instrument or the
drive itself may break, or you may lose your data.
3.
Turn the power back on.
The USB icon ( ) will be shown in the top right of the
display.
Note:
If does not display, turn off the power and
reconnect the USB flash drive.
Note:
Be sure to format the USB flash drive before using it for
the first time on this instrument.
When removing the USB flash drive, be sure to turn off the
power first.

Basic method of use

The basic method of making settings using the MEDIA
functions is as shown below.
The MEDIA functions will not work unless you plug a USB
flash drive into this instrument.
1.
Connect a USB flash drive.
See "Connecting and removing USB flash drives"
(page 28).
2.
Press the SETTING/[MEDIA] button while holding down
the [SHIFT] button.
This will enter the MEDIA functions.
3.
Select the menu to set using the CATEGORY buttons t/u.
4.
Press the BANK/WRITE button.
"Cancel [<]" will be displayed.
5.
Turn the dial to select the next function, and follow the
directions shown in the display.
For instance, to select "Yes [WRITE]", press the BANK/
WRITE button to go to the next step. To select "Cancel [<]",
press the CATEGORY button t to stop the operation and
return to step 2.
6.
When the operation is finished, the message "Completed!"
will be displayed. Press the [SHIFT] button to return to
the previous mode.
MEDIA functions
Formatting a USB flash drive
In order to use a USB flash drive on this instrument, you will
need to format (initialize) it first.
1.
In the MEDIA functions, press the CATEGORY button t/
u and select "Media Format".
The message "Enter [WRITE]" will be displayed.
2.
Press the BANK/WRITE button.
"Cancel [<]" will be displayed.
3.
Turn the dial to select "Yes [WRITE]", and press the
BANK/WRITE button.
"Are You Sure?" will be displayed.
4.
Turn the dial to select "Yes [WRITE]", and press the
BANK/WRITE button.
5.
When the operation is finished, the message "Completed!"
will be displayed. Press the [SHIFT] button to return to
the previous mode.
Loading user styles
You can load and use Pa50, Pa50SD and microARRANGER user
styles on the XE20.
Copy the user styles (files with an .STY extension) and the user
programs (file with a .PCG extension) to a USB flash drive, and
then load them into the XE20.
Note:
back on the XE20 may sound different from the instrument on
which you created the original data.
1.
On your computer, create a folder named "XE20" on the
root directory of your USB flash drive, and then make a
"STYLE" and "PROGRAM" subfolder in that folder.
2.
Copy the user styles to the STYLE folder, and the user
programs to the PROGRAM folder.
• User styles
From USER01.STY to USER06.STY
• User programs
USER01.PCG, USER02.PCG, USERDK.PCG
Tip:
and user programs.
3.
Connect the USB flash drive that contains your user style
and user program data to the USB TO DEVICE port of the
XE20.
4.
Following the "Basic method of use," select and execute
"UserStyleLoad" in the MEDIA function.
5.
When the operation is finished, the message "Completed!"
will be displayed. Press the [SHIFT] button to return to
the previous mode.
The user styles will be loaded into the XE20 memory from
style 901. onward, and the user programs will be loaded
into memory from sound 001. onward. A dot (".") will be
shown after each number.
Note:
styles, the previous user styles will be erased.
Specifications vary by product, so the sounds that play
You can select specific data to load for the user styles
If you load a different user style after loading these