Advertisement
Once the new faceplate is installed, you may get the following prompt on the LCD: "Modules
10)
changed, Press key to update". If so, do the following:
a) Press the ENTER key. Prompt will appear: "Update Catalog number?"
b) Press the right arrow key to select "Yes" then press ENTER
c) The old style number will appear. Press the down arrow key once.
d) The new style number will appear. Press the down arrow key once.
e) Prompt will appear: "Confirm Update?" Press the right arrow key to select "Yes".
f)
A password prompt will appear. Press ENTER to proceed, as the default password is 4 spaces.
g) After the modules have been updated, reset the PCD by pressing the reset button on the rear of the CPU
module. The Self Check LED at the right hand side center of the faceplate should now be GREEN. If it is
RED call ABB for assistance.
The Hot Line Tagging feature of new front panel is not functional after this installation. To activate this feature,
refer to "Application Note: Tagging Function in the PCD Utilizing the Enhanced Front Panel"
Call 1-800-929-7947 option 5 or +1-407-732-2000 ext. 2510 for any other questions you may have.
ABB Inc. has made every reasonable attempt to guarantee the accuracy of this document, however, the information
contained herein is subject to change at any time without notice and does not represent a commitment on the part
of ABB Inc. These instructions do not purport to cover all details or variations in equipment, nor provide for every
possible contingency to be met in conjunction with installation, operation or maintenance. Should particular
problems arise which are not covered sufficiently, please contact ABB Inc.
Address
655 Century Point
Lake Mary, FL 32746
Telephone
+1-407-732-2000
1-800-929-7947
ABB
ABB Inc.
Fax
407-732-2029
www.abb.com/mediumvoltage
have
March 24, 2005
1VAL264213-HT
Advertisement
