Advertisement
Table of Contents
DO NOT
USE
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE
NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME. THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXING.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET)
DO NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
LISBON BLANKET BOX
ASSEMBLY INSTRUCTIONS
FOR DOMESTIC USE ONLY
IMPORTANT
SEC/SH/10/18/EU1
PAGE 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seconique Lisbon Blanket Box 100-104-005
Summary of Contents for Seconique Lisbon Blanket Box 100-104-005
- Page 1 SEC/SH/10/18/EU1 LISBON BLANKET BOX ASSEMBLY INSTRUCTIONS DO NOT FOR DOMESTIC USE ONLY IMPORTANT PLEASE READ BEFORE YOU CONTINUE FURTHER THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
- Page 2 SEC/SH/10/18/EU1 (SCREWDRIVER NOT PROVIDED) USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED. STEP 1 - PUSH CAM BOLT INTO INSERT STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW ON THE CAM LOCK IS POINTING TOWARD ON THE EDGE OF THE PANEL.) STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK.
- Page 3 SEC/SH/10/18/EU1 PARTS LIST PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED BEFORE YOU START ASSEMBLING. IF YOU DO FIND THAT SOMETHING IS MISSING, DO NOT CONTINUE ASSEMBLY, PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY. BOTTOM PANEL FRONT PANEL BACK PANEL LEFT SIDE PANEL RIGHT SIDE PANEL CUSHION THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE...
- Page 4 SEC/SH/10/18/EU1 STEP 1 HARDWARE LIST HARDWARE NEEDED: MAKE SURE THE ARROW ON THE CAM LOCK IS POINTING 16PCS DOWEL 6x30MM 20 PCS TOWARD THE HOLE ON THE 8PCS EDGE OF THE PANEL. BOLT M6x50MM 8 PCS 4PCS SCREW M3.5x16MM 20 PCS L SHAPE HINGE 2 PCS HINGE...
- Page 5 SEC/SH/10/18/EU1 STEP 3 STEP 2 HARDWARE NEEDED: HARDWARE NEEDED: 4PCS 4PCS 4PCS 8PCS 2PCS 2PCS 1SET STEP 3.1 STEP 2.1 THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE CAUTION : ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE. PAGE 5...
- Page 6 SEC/SH/10/18/EU1 STEP 4 STEP 5 HARDWARE NEEDED: HARDWARE NEEDED: 4PCS 4PCS 8PCS 4&5 4PCS 2PCS STEP 4.1 STEP 5.1 THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE CAUTION : ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE. PAGE 6...
Need help?
Do you have a question about the Lisbon Blanket Box 100-104-005 and is the answer not in the manual?
Questions and answers