Advertisement
C DISASSEMBLY
14 Switch the appliance off (0) and unplug it.
15 Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the
motor unit.
16 Turn the ring nut 2mm clockwise, to unlock it, and lift it of the body.
17 Tip the body up, so that the cutter drops out.
C JAMMING
18 Switch the appliance off (0) and unplug it.
, Dismantle the appliance, clean it, assemble it, and start again.
C CARE AND MAINTENANCE
19 Switch the appliance off (0) and unplug it.
20 Wipe the outside of the motor unit with a clean damp cloth.
21 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
` You may wash these parts in a dishwasher.
22 Carotenoids, which are found in many other vegetables as well as carrots, can cause
severe staining. This staining may be impossible to remove. Don't worry about it, it
won't affect the operation of the appliance.
23 Rubbing the stains with cooking oil immediately before washing may help.
24 Cleaning the affected parts in a dishwasher may reduce the staining.
25 If you use a dishwasher, the harsh environment inside the dishwasher will affect the
surface finishes.
26 The damage should be cosmetic only, and should not affect the operation of the
appliance.
C STORAGE
27 You may store two of the cutters in the spaces in the rear of the appliance.
C NOISE
28 If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
29 Applying a little cooking oil to the inside of the ring nut before use should fix this.
4
Advertisement
