Battery Charging And Alerts; Vibration Alert Settings; Out Of Range - LG TONE Style HBS-SL6S User Manual

Battery Charging and Alerts

Open the Charging Port cover and connect the charger to the Charging Port.
Press and hold the Volume Button (Previous
Indicator Lamp and battery level by voice.

Vibration Alert Settings

Out of Range

If the device connected to the product is out of effective communication range, the communication
signal becomes weak and the communication is lost. The effective communication range may vary
depending on surrounding and other conditions.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the MFB on the
product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost. In this case, the
automatic reconnection function is not supported.
Indicator Lamp
Battery Status
The headset is turned off while being charged.
NOTE: If the temperature is too high or too low, the status indicator lamp
blinks in red and the battery is not charged.
For more information on the battery, go to [Additional Information] >
[5. Battery information].
Battery Status
Indicator Lamp
The headset is set to Vibration Alert by default. To enable or disable
Vibration Alert, press and hold Volume Button (Next
two seconds in idle mode.
NOTE: If you turn off the vibration alerts, it will not vibrate even when a
call is being received or you are out of communication range.
Red Purple
Charging 80%
) for one second in idle mode to check the
Sufficient Normal
Blue flashes Purple flashes
Blue
Completed
Insufficient
Red flashes
) for
9