Battery Charging And Alerts; Vibration Alert Settings; Out Of Range - LG TONE Ultra SE User Manual

Battery Charging and Alerts

Open the Charging port cover and connect the charger to the Charging port.
Slide and hold the Volume jog switch in the volume down ( ) direction for one second to check the
Indicator lamp and battery level by voice.

Vibration Alert Settings

Out of Range

If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the MFB on the
product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost. In this case, the
automatic reconnection function is not supported.
Indicator Lamp
Battery Status
Battery Status
Indicator Lamp
Slide and hold the Volume jog switch in the volume up
for two seconds when the headset is not in use.
If you turn off the vibration alerts, it will not vibrate even when a call
is being received or you are out of communication range.
NOTE: When vibration is turned off, the headset will not vibrate
when receiving an incoming call.
Red Purple
Charging 80%
Sufficient Normal
Blue flashes Purple flashes
Blue
Completed
Insufficient
Red flashes
direction
( )
9