Start-Up And Operation - NovoPress KE KELIT ACO401 Operating Manual

6.3.3 Battery level indicator
The battery level is displayed when button (B) is pressed. The number of LEDs lit up denotes
the battery level.
If the battery is inserted in the press device when the battery level is checked, the last pressing
operation must have been completed at least 1 minute prior to this. Otherwise the display will be
inaccurate.
6.4 Press device and rechargeable battery
Information!
The ACO 401 press device must only be operated with 3.0 Ah 18 V
lithium-ion rechargeable batteries. The 18 V rechargeable battery must
only be used in the appropriate press devices.
Feature of the press device after extended periods out of use or when changing the
battery
If the press device is out of use for approx. one hour or the battery is reinserted, it switches to
SLEEP mode. The LED is no longer illuminated. Press the Start button to start the press device.
Feature of the press device when the battery is empty
When a pressing operation begins, a check is made to determine whether the battery charge is
sufficient to complete the pressing operation. If this is not the case the device does not start.
The green LED flashes.
If the green LED flashes following a pressing operation, the pressing operation was carried out
correctly. The battery must be recharged prior to the next pressing operation.
7

Start-up and operation

CAUTION!
Fingers risk being crushed if the device is operated without a press
collar. (Fig. 4a)
If the press device is not placed on a press collar, fingers could be placed in the at-
risk zone. Fingers could be crushed when the device is started.
Therefore
– Do not operate the device without a press collar.
– Keep your fingers away from the at-risk zone.
Information!
The ACO 401 press device is not suitable for continuous operation. A
short break of at least 15 minutes must be taken after approx. 15-20
pressing operations in succession in order to allow the device to cool
down.
10
ACO401