ASROCK Z490 AQUA User Manual page 44

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.9, No. 27)
Serial ATA3 Connectors
(SATA3_0_1:
see p.9, No. 20)
(SATA3_2_3:
see p.9, No. 21)
(SATA3_4_5:
see p.9, No. 22)
(SATA3_A1_A2:
see p.9, No. 23)
USB 2.0 Header
(9-pin USB_1_2)
(see p.9, No. 30)
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
+5V the chassis speaker to this
header.
1
PLED+
PLED+
PLED-
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* M2_2, SATA3_0 and
SATA3_1 share lanes. If
either one of them is in
use, the others will be
disabled.
* M2_3, SATA3_4 and
SATA3_5 share lanes. If
either one of them is in
use, the others will be
disabled.
* PCIE5, M2_3 and
SATA3_3 share lanes. If
either one of them is in
use, the others will be
disabled.
*To minimize the boot
time, use Intel® Z490
SATA ports (SATA3_0)
for your SSDs.
There is one header on
USB_PWR
P-
P+
this motherboard. This
GND
DUMMY
USB 2.0 header can
1
support two ports.
GND
P+
P-
USB_PWR
Z490 AQUA
37