ASROCK Z490 AQUA User Manual page 108

Z490 AQUA
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
Onboard HDMI HD Audio
Enable audio for the onboard digital outputs.
Onboard WAN Device
Use this item to enable or disable the onboard WAN device.
WAN Radio
Enable/disable the WiFi module's connectivity.
Bluetooth
Enable/disable the Bluetooth connectivity.
Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
Turn On Onboard LED in S5
Turn on Onboard LED in the ACPI S5 state.
Restore Onboard LED Default
Restore Onboard LED default value.
RGB LED
This option enables/disables the RGB LED.
Onboard Button LED
Enable/disable the onboard button LED.
Onboard Debug Port LED
Enable/disable the onboard Dr. Debug LED.
101