Klarstein Darjeeling 2G Manual page 9

Basic Operation
• Put the base on the dry , smooth and horizontal plane , insert the plug to the socket. When
the kettle is inserted into the base , the power puts through automatically.
• Press the "Power" key shortly, with the sound "Di", it starts running.
• After the water boils,indicator turns off and the buzzer sends out a "di-"sound at the same time.
1 Open lid
2 Fill in water
3 Put on base
4 Press POWER button,
Light comes on
5 Light goes out,
water is hot
Advanced Operation
• Press "POWER" for 3 seconds,with the buzzer sends out "di"sound, it starts running the
function of heat insulation. The LED light will be shinning with red light,while after the
water boils,the kettle will keep the water temperature for 2 hours with the indicator light
shinning. During the 2 hours heat insulation function running, it will go on heating when
the temperature arrives at 85°C.
• Press (+/-) for once,we can see the indicator light of 60°C shines,with the green LED
light.It means that it will stop heating when the water temperature is 60°C.
• Press (+/-) for twice, we can see the indicator light of 70°C shines,with the blue LED light.
It means that it will stop heating when the water temperature is 70°C.
• Press (+/-) for 3 times we can see the indicator light of 80°C shines,with the yellow LED
light.It means that it will stop heating when the water temperature is 80°C.
• Press (+/-) for 4 times we can see the indicator light of 90°C shines,with the purple LED
light.It means that it will stop heating when the water temperature is 90°C.
• After the use finished, please put plug off the power socket.
9