Epson Stylus Pro GS6000 Maintenance Manual page 10

EPSON Stylus Pro GS6000 Revision A
6.4.2 Around the Print head
I.
Perform Step 1 to Step 5 in ·'Cleaning Wiper (p226)".
2. Open the MAINTENANCE COVER ASSY (left).
Figure 6-13. Opening the Maintenance cover (left)
3. Using a penlight or the like, confirm that there are no foreign objects, such as dust
or ink attached on or around the PRINT HEADs as shown in the tigure below.
Figure 6-14. Checking around the
PRINT
HEAD
CAUTION
•
l
!
J •
_ __
_..
Do not touch the nozzle of the PRINT HEAD, or the PRINT
HEAD may be damaged.
Do not touch the head of the Cleaning Stick with bare fingers,
or oil on your hand may be attached to the Cleaning Stick. It
may cause damage to the PRINT HEAD.
• Never dip the head of the Cleaning Stick in water. Otherwise,
the water on it will react with the solvent and damage the
PRINT HEAD.
• Do not reuse the Cleaning Sticks without rinsing. Dust attached
to the stick may damage the PRINT HEAD.
4. Ifforeign objects, such as dust or ink are attached to the PRINT HEAD, remove
them using the Cleaning Stick.
5. If the dirt does not come off. use the Ink Cleaner. See "6.4.1 Cleaning Wiper" Step
8. (p226) .
PRINT HEADs
Figure 6-15. Cleaning around the PRINT HEADs
MAINTENANCE Cleaning 228
Conftdenttaf