Installation of Indoor, Outdoor Unit
n How to fix installation plate
The wall you select should be strong and
solid enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a
concrete wall, use anchor bolts.
• Mount the installation plate horizontally by
aligning the centerline using a level.
2. Measure the wall and mark the centerline.
It is also important to use caution
concerning the location of the installation
plate-routing of the wiring to power outlets
is through the walls typically. Drilling the
hole through the wall for piping connections
must be done safely.
n Drill a hole in the wall
• Drill the piping hole with a ø70mm hole core
drill. Drill the piping hole at either the right or
the left with the hole slightly slanted to the
outdoor side.
12 Air Conditioner
Chassis
Hook
Installation plate
Ø70mm
133mm
Left rear piping
Standard
WALL
Indoor
Installation Plate
Type "A"
Ø70mm
100mm
Right rear piping
Outdoor