Table of Contents
Advertisement
3. Bundle the piping and drain hose together by
wrapping them with vinyl tape over the range
within which they fit into the rear piping
housing section.
CAUTION: Installation Information (For right piping)
For right piping, follow the instruction below.
Good case
• Press on the upper side of clamp and unfold
the tubing to downward slowly.
Bad case
• Following bending type from left to right could
cause problem of pipe damage.
Installation of Indoor, Outdoor Unit
Wrap with vinyl tape
Pipe
Vinyl tape(wide)
Drain hose
Installation Manual 11
Advertisement
Table of Contents
