Table of Contents
Advertisement
13. Before mounting and using the machine,
check the PTO drive shaft for correct condi-
tion and attachment.
14. Never use a faulty or deficient machine.
15. Using the tractor link arms to mount the top
link is prohibited. The top link is to be
mounted by adjusting its length.
TRANSPORT
1. Before driving with the machine, ensure
the safe mounting of the machine. Make
sure that the journals are seating correctly
and that the pins are tight. Check the tensi-
on of the lower link stabilizers.
2. Before
driving
make sure that the required lamps
and reflectors as well as the slow
moving vehicle sign are attached correctly.
Moreover, the lamps should be checked for
correct functioning.
3. Before driving with the attached machine,
make sure that the hydraulic unit of the
machine is depressurized (unless otherwise
instructed in the operating instructions).
4. When driving on public roads, always
observe the valid traffic regulations. The
travel speed must be adapted to the speci-
fic conditions.
5. When driving, please take into considerati-
on the additional mass resulting from the
machine's weight. It may affect the reac-
tions, the steerability and the braking func-
tion of the tractor.
6. Please note that the machine rear sways
when turning.
7. Pay attention to the machine's height near
bridges or other height restricting objects.
8. When backing off, the machine may
obstruct the rear view. Exercise extreme
caution. If necessary, ask a flagman to help
you; he can indicate the required distances.
9. It is prohibited for other people to ride on
the machine.
CH27 ACR/ACC PROFI
with
the
machine,
OPERATION
!
DANGER!
!
CAUTION!
1. Depending on the machine's type, it will
have diverse safety devices and protectors.
These are meant to protect the machine
and its operator, and they must never be re-
moved or altered. Never start up or use the
machine without all the safety devices and
protectors in place.
2. Also check the universal joint's safety
equipment and joins.
3. Never insert any body part into the
machine with the engine running.
4. If any faults arise that may jeopardize
occupational safety, turn off the machine.
5. During operation, the machine's operator
is responsible for safety in the whole work
area. Work may not be carried out in the
presence of any factors that jeopardize oc-
cupational safety.
6. Exercise extreme caution when hitching /
unhitching the machine from a tractor/
trailer.
7. Look out for moving parts when the
machine is in operation.
8. Secure the machine against unauthorized
and accidental operation (e.g. moving
when parked) whenever it is left unatten-
ded.
9. Never leave the machine running unat-
tended.
10. Avoid causing fast, stroke-like loading.
11. Never exceed the given operating values.
12. All safety and warning signs on and in the
machine must be legible and intact.
13. The machine may not be operated by
persons who are unwell or under the
influence of drugs or alcohol.
11
Many occupational ac-
cidents take place in ab-
normal circumstances.
Therefore it is important
to take into account all the
possible circumstances that
may arise during operation
of the machine.
The machine's opera-
tor must have constant,
unobstructed visibility of
the work area. If this is not
possible, the operator must
work with an assistant.
Advertisement
Table of Contents
