Download Print this page
Kohler MODULO 78023T-4 Installation Instructions
Kohler MODULO 78023T-4 Installation Instructions

Kohler MODULO 78023T-4 Installation Instructions

Recessed thermostatic shower only trim & valve, recessed thermostatic bath shower trim & valve

Advertisement

Quick Links

SERVICE PARTS
78023T-4
78023T-4A Recessed Thermostatic Shower Only Trim & Valve
78024T-4
78024T-4A Recessed Thermostatic Bath Shower Trim & Valve
871363
78024T-4/4A:3016024
78024T-4/4A:3012834
78023T-4/4A:3015939
1228263
870667
1228264
75605
3016134
3019692
870992
871363
78023T-4/4A:3021300
1226024
831752
870667
3016134
75588
3019455
1289491
3008304
3021239
1244917
3018303
1226023
3018256**
871241
**Color code must be specified when ordering.
NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
1301217-2A-A
MODULO
3014237**
871241
78024T-4/4A:1323373**
1289490
78023T/78024T-4:1328175**
Cold:1226020
870992
Hot:1226021
871568
831718
78023T-4/4A:1323375**
78023T/78024T-4:1328177**
78023T/78024T-4A:1289684**
3018197
831718
3018196
3010602
78023T/78024T-4A:1289689**
INSTALLATION INSTRUCTIONS
78023T-4
78024T-4
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage and leakage. Replace and maintain as necessary.
3. Observe local plumbing codes. Shut off the main water supply.
4. Check for leaks before covering the pipes, repair as needed.
5. Please ensure only apply water pressure test on the product, and empty the air in pipe and faucet thoroughly
before the test. Please ensure test pressure below 0.8MPa(8bar) and test duration within 30 minutes.
OPERATION CONDITION
1. Minimum supply pressures: 0.5bar.
2. Recommended supply pressures: 3bar on hot and cold water.
3. If supply pressure higher than 5bar: install a pressure reducer.
4. Pressure difference between hot and cold supply: 2bar maximum.
5. Hot supply water temperatures, minimum: 50ºC, maximum: 70ºC.
6. Recommended hot supply water temperature: 60ºC (energy-saving).
831416
7. Setting range, approximately: 20ºC to 49ºC.
1226027
8. Safety stop at: 37ºC.
1226026**
STANDARD APPLICABLE
Special model meets or exceeds the following at date of manufacture: TIS
ROUGH-IN DIMENSIONS
Ø180
831416
1226027
1226026**
78023T-4 & 78024T-4
4
1301217-2A-A
78023T-4A Recessed Thermostatic Shower Only Trim & Valve
78024T-4A Recessed Thermostatic Bath Shower Trim & Valve
The finished wall
15
67~97
MODULO
The finished wall
Ø180
15
67~97
78023T-4A & 78024T-4A
1

Advertisement

loading

Summary of Contents for Kohler MODULO 78023T-4

  • Page 1 78024T-4A Recessed Thermostatic Bath Shower Trim & Valve BEFORE YOU BEGIN 871363 All information is based on the latest product information available at the time of publication. Kohler Co. reserves 78024T-4/4A:3016024 the right to make changes in product characteristics, packaging, or availability at any time without notice.
  • Page 2 37ºC. To get a higher temperature, push the button and continue turning the temperature handle. Do not use abrasive cleaners or solvents on Kohler faucets and fittings. Water flow is set by turning the top flow handle.

This manual is also suitable for:

Modulo 78023t-4aModulo 78024t-4Modulo 78024t-a