Pro-Cut KG-12-FS Instructions For Operation, Service And Maintenance page 6

REVIEW BY CONSUMER
HEADSTOCK RING (20)
MOTOR AND SWITCH
5.- PARTS TO CARE FOR WEARING OUT:
TIME
1 MONTH
6 MONTHS
2 YEARS
4 –5 YEARS
NOTE: THE TIME IS AN AVERAGE PERIOD, ITS DEPEND ON THE USAGE.
The kind of oil is SAE 80W90 or equivalent, the quantity is ¾ of liter.
VIII.- ELECTRICAL SPECIFICATIONS
MODEL VOLTAGE
KG-12-FS 115 V~
FREQUENCY OF
VERIFICATION
ONCE A YEAR PART REVIEW THREAD SO PREVENT ACCIDENTS
BAD JOIN IN THE HEAD
NOT ON THE TEAM WITH THE HEAD FULL OF
DAILY PRODUCTS AND / OR BECAUSE THIS CAUSES
ATOR
DAMAGE AND /OR SWITCH.
FRECUENCY
60 HZ
COMMENTS
HIGHER AMPERAGE
PARTS TO REVIEW
AND CHANGE
NYLON WASHER (15)
KNIFE (18)
PLATE (19)
TRANSMISSION OIL
WORM (16)
HEADSTOCK (13)
CURRENT PHASES
10,4 A 1 Ø
KG-12-FS
PEAKS ENGINE
MOTOR POWER
559 W 3/4 (HP)
6