Replacing The Remote Control Battery; Re-Assigning The Remote Control; Replacing The Ceramic Honeycomb Filter - Geberit AQUACLEAN MERA CLASSIC User Manual

Replacing the remote control
battery
Prerequisite
– During the entire procedure, the remote
control must be located in the reception
range of the shower toilet.
1
Remove the used battery. Dispose of
the used battery appropriately.
2
Insert a new CR2032 battery.
42
Re-assigning the remote
control
The device can only be operated
with a single, assigned remote
control.
▶
Press the <+> button on the remote
control and the <up> button on the
lateral control panel for approx.
30 seconds until [Pairing ok] appears
on the display.
Result
✓ The shower toilet can be controlled by
remote control.
Replacing the ceramic
honeycomb filter
CAUTION
Possible health hazard
Impurities in the filter could lead to
contamination of the breathing air.
▶ Replace the filter annually.
The ceramic honeycomb filter is
located on the bottom right side of
the device. It is fastened with a catch
spring.
63050395945953803 © 05-2019
966.983.00.0(04)