Setting the spray arm position ..................Setting the dryer air intensity ..................Saving user profiles ......................Calling up user profiles ....................Saving a personal user profile in the Geberit Home App ..........How to program the device ..................... Overview of the programming options ................
Page 4
Replacing the remote control battery ................Re-assigning the remote control ..................Replacing the ceramic honeycomb filter ................ Sustainability ........................Geberit Group and sustainability ..................Ecodesign – ecobalance ....................Tips for reducing the ecological footprint ................ Disposal ..........................Disposal of old electrical and electronic equipment ............
• leave the WC seat ring during the shower procedure • place loads or objects on the WC lid • immerse the remote control in liquid • operate without plug for Geberit AquaClean descaling agent Misuse Geberit accepts no liability for the consequences arising from misuse. www.easycaresystems.co.uk...
Geberit AquaClean has been removed (e.g. if you move house). • The Geberit AquaClean must only be connected to a mains voltage conforming to the specification plate. • Observe the manufacturer information at all times regarding the use of cleaning and descaling agents.
These instructions correspond to the state of the device technology at the time of printing. Geberit reserves the right to make changes in terms of further development. A current version of this and other documents is available online: www.geberit.com .
The following signal words are used to indicate residual hazards in warning notes and important information. Symbol Signal word and meaning DANGER The signal word denotes a hazard with a high degree of risk which, if not avoided, will result in death or serious injury.
AquaClean for free. Register for this within 90 working days from the installation date. In the third year of the warranty period, Geberit shall supply spare parts free of charge in the event of any material or manufacturing faults, provided the product has been installed and put into operation by an installation company.
Getting to know your device About Geberit AquaClean devices The Geberit AquaClean device is a WC with integrated shower function. The device fulfils all the functions of a conventional toilet. Additional functions are subject to the design of your product.
Dryer arm with dryer nozzle Spray arm with spray nozzle and Lady shower nozzle Ceramic honeycomb filter (art. no. 242.999.00.1 ) Spray shield Geberit AquaClean cleaning set (art. no. 242.547.00.1 ) Geberit AquaClean descaling agent (art. no. 147.040.00.1 ) www.easycaresystems.co.uk...
Page 12
Filling opening with plug for Geberit AquaClean descaling agent Specification plate with serial number Design cover with magnet Power switch www.easycaresystems.co.uk...
The remote control function of the Geberit AquaClean shower toilet is deactivated while the shower toilet is connected to the Geberit Home App. Front side of the remote control All functions for daily use can be operated from the front side of the remote control.
Rear side of the remote control You can access system settings and additional functions from the rear side of the remote control. Battery compartment LCD display <up> /<down> , <left> /<right> arrow keys Lateral control panel The shower toilet functions of the device can be operated from the lateral control panel on the shower toilet.
Status LED on the lateral control panel The status LED on the lateral control panel informs you of the current device status. The current condition of the device is therefore visible. Status LED Description Does not light up Heating element is switched off/economy mode is active. Lights up blue The heating element is switched on.
Switching on the device Close the design cover. Wait at least 30 seconds between the switch-off and switch-on procedures. Open the design cover. Result ✓ When the blue status LED goes out, initialisation is complete. Turn on the power switch to start initialisation.
Switching off the device Close the design cover. Wait at least 30 seconds between the switch-off and switch-on procedures. Close the WC lid. Open the design cover. Restore to factory settings Prerequisite – You want to reset your personal settings and restore the factory settings as the basic settings.
Geberit App Checking compatibility To ensure you can use the Geberit App to its full extent, you will require a smartphone with: • Android version 6.0 (or higher), or • iOS version 11.0 (or higher). If the Geberit App still does not work despite meeting the prerequisites specified above, please check the permissions ( Bluetooth®...
– playing function videos – playing maintenance and cleaning videos • troubleshooting – displaying error messages • user manual – displaying the user manual All settings can be saved in the Geberit Home App as presettings and transferred to other devices. www.easycaresystems.co.uk...
How to use the device Getting started When using the device, the following functions should take place. When you enter the detection range of the device, • the orientation light switches on • the WC lid opens • the WC seat ring heating activates When you sit down on the WC seat ring, •...
Using the anal shower Switching the oscillating motion of the anal shower on Prerequisite and off – You are sitting down on the WC seat ring. The oscillating motion of the spray arm increases the cleaning effect. Press the <Shower> button on the remote control.
Using the Lady shower Using the dryer Prerequisite The woman's intimate area is a very – You have ended the shower procedure. sensitive zone and requires special and prudent care. The Lady shower ▶ must be set to your ergonomic Press the <Dryer>...
Adjusting the shower Setting the spray arm position procedure to your Prerequisite – The shower procedure is running. personal needs – The spray arm position can be set in 5 levels. Setting the spray intensity ▶ Touch the <left> or <right> button. Prerequisite ✓...
Setting the dryer air intensity Saving user profiles 4 different user profiles can be stored via the Prerequisite <user profile> buttons on the remote control. – The drying procedure is running. – The dryer air intensity can be set in User profiles allow you to access 5 levels.
Calling up user profiles Saving a personal user profile in the Geberit Home App User profiles allow you to access your personal settings directly. Prerequisite Select your user profile as soon as – The current version of the you sit down.
How to program the device Overview of the programming options The following main menus are available: • [Basic settings] • [Profile settings] • [Care and maintenance] The system settings can be configured from the rear side of the remote control: •...
Page 27
Shown on display Note Sets menu language English Spray intensity Sets spray intensity for the anal shower Spray arm position Sets spray arm position for the anal shower Spray intensity Lady Sets spray intensity for the Lady shower Spray arm pos. Lady Sets spray arm position for the Lady shower Shower water heating Temperature regulation of the shower water...
Page 28
Shown on display Note [on] = The orientation light stays on permanently. Orientation light [off] = The orientation light is deactivated. [on approach] = The orientation light switches on approach on automatically as soon as a user is detected. Orientation light colours: Orient.
Page 29
Shown on display Note [on] = The system flush starts as soon as a user is detected on the WC. [off] = The system flush starts before the System flush shower procedure as soon as the <Shower> button is pushed. If the system flush is switched off, then the flush time before the end of the shower procedure is approx.
Profile settings main menu Profile settings Launch the [Profile settings] main menu using the <left> /<right> arrow keys on the rear side of the remote control. Use the <up> /<down> arrow keys to select the settings which you would like to change. Shown on display Note Select user profile...
Page 31
Shown on display Note [on] = The oscillating motion of the spray arm Oscillating spray is activated. [off] = The oscillating motion of the spray arm is deactivated. [on] = The dryer functionality starts automat- Dryer ically after the spray functionality. [off] = The dryer functionality is deactivated.
Care and maintenance main Care and maintenance menu Launch the [Care and maintenance] main menu using the <left> /<right> Use the up/down arrow keys to arrow keys on the rear side of the access the next menu item. remote control. Shown on display Note Next descaling in...
Page 33
[yes] = Display of the device information Show device info? [no] = Continue with the [Error message] menu Model Displays the type/equipment version Article number Displays the Geberit article number 146.xxx.xxx. Serial number Displays the device serial number (required in case of service) HBxxxxxxxxxx Commissioning date...
Page 34
Shown on display Note Set WC lid? Safety query for setting the opening angle of the WC lid WC lid position Sets the opening angle for the WC lid www.easycaresystems.co.uk...
Cleaning interval Cleaning activity ▶ Remove water drops with a soft, lint-free cloth to avoid Daily limescale stains. ▶ Clean the WC ceramic appliance with Geberit AquaClean cleaning agent. → See "Care instructions for sanitary ceramic appliances", page 38 . ▶ Clean all surfaces and corners thoroughly. → See "Cleaning...
Suitable cleaning agents and cleaning equipment ATTENTION Aggressive descaling agents Unsuitable descaling agents may cause damage to the device. ▶ Only use Geberit AquaClean descaling agents to descale the device. ▶ Refer to the “Descaling the device” section. ATTENTION Aggressive and scouring cleaning agents Cleaning using aggressive and scouring cleaning agents can cause surface damage.
Page 37
Using the Geberit AquaClean cleaning set is recommended, as this set includes a ready-made cleaning agent that is ideal for cleaning all Geberit AquaClean surfaces. Recommended properties of suitable cleaning agents and cleaning equipment for best cleaning results: Symbol Properties of suitable cleaning agents Skin-friendly Cleaning agents are permitted to have a low acid content, e.g.
Aggressive and scouring cleaning agents can damage the surface. Only use mild, liquid cleaning agents that are kind to the skin. The Geberit AquaClean cleaning set (art. no. 242.547.00.1 ) includes a ready-made cleaning agent that is optimal for cleaning all Geberit AquaClean surfaces.
Care instructions for WC seat Please note the following when cleaning the WC seat: • Ensure that the WC seat is opened or dismounted during the application time of cleaning agents. • Never use cleaning agents that contain chlorine or acid or that are corrosive. •...
Page 40
✓ The WC seat ring is removed and can be cleaned. Spray the surfaces with Geberit AquaClean cleaning agent. Wipe the surfaces with a soft, lint- free, damp cloth. Then dry the surfaces with a soft, lint- free cloth.
WC seat. Always place the components on a soft, non- scratching underlay. Open the design cover. Spray the surfaces with Geberit AquaClean cleaning agent. Wipe the surfaces with a soft, lint- free, damp cloth. Then dry the surfaces with a soft, lint- Gently lift the WC lid to activate the free cloth.
Replace the spray nozzle if it can no <Shower> button at the same time. longer be completely cleaned and descaled. Spray the spray arm with Geberit AquaClean cleaning agent. Then rinse the spray arm with water. Dry both parts carefully before re- assembling and re-fitting the spray arm.
Page 43
Unlock the dryer arm by turning it Press the <Shower> button on the 90° to the left. Pull the dryer arm out. lateral control panel. ✓ The dryer arm retracts completely. Result ✓ The cleaning procedure is now complete. Press the unlock button on the rear side of the dryer arm and pull out the dryer nozzle.
ATTENTION Aggressive descaling agents Unsuitable descaling agents may cause damage to the device. ▶ Only use Geberit AquaClean descaling Remove the plug. agents to descale the device. ▶ Refer to the “Descaling the device” section. The descaling procedure should not...
Page 45
✓ The display shows Fill in the descaling agent ... Select <yes> via the arrow keys and Pour a bottle (125 ml) of Geberit confirm with the <down> arrow key. AquaClean descaling agent into the filling opening. Start descaling? ✓...
Device descaling message During installation, the device was configured for the local water hardness in accordance with the following table. This adaptation prevents unnecessary descaling procedures and helps protect the environment. Nevertheless, regular descaling of the device is required. Area °fH °dH °eH...
Troubleshooting Troubleshooting The table below explains what you need to do in the event of a fault: • Carry out the steps one after the other until the device is no longer demonstrating any faults or is working as normal again. •...
The shower toilet is without function The following table will help you with troubleshooting if the shower toilet is without function. DANGER Electric shock Incorrect maintenance work or troubleshooting can lead to serious injury or death. ▶ In case of malfunctions, the device must immediately be switched off at the power switch and the customer service must be contacted.
Other functional errors The following table will help you with troubleshooting if individual functions of the shower toilet have failed. The shower toilet can be used as a normal toilet even in the event of a malfunction. The spray arm and dryer arm must be fully retracted. You start the toilet flush as usual by pressing the buttons on the cistern.
• the remote control is not functioning, • the remote control is unable to control the shower toilet. The remote control is inactive while the Geberit Home App is in use. Should the remote control fail to function, you can use the lateral control panel instead.
Replacing the remote control Re-assigning the remote battery control Prerequisite The device can only be operated – During the entire procedure, the remote with a single, assigned remote control must be located in the reception control. range of the shower toilet. ▶...
Replacing the ceramic Bend the catch spring gently to the honeycomb filter side to unfasten the ceramic honeycomb filter. At the same time, remove the used filter from the CAUTION bracket. Possible health hazard Impurities in the filter could lead to contamination of the breathing air.
Page 53
Insert the new filter. Use the arrow keys to select <yes> . Result ✓ Odour neutralisation will now function again. ✓ The catch spring is used to fasten the new filter. Launch the [Care and maintenance] main menu using the buttons on the rear side of the remote control.
A company management geared to sustainability helps to save costs while minimizing risks at the same time. Geberit aims to act as a role model and set standards for its customers, suppliers and other partners. This means creating water-saving and sustainable products,...
The symbol indicates that the product cannot be disposed of with non- recyclable waste. Old equipment should be returned directly to Geberit where it will be disposed of appropriately. Addresses to which equipment can be returned can be requested from the relevant Geberit sales company.
Geberit and contracted by the end user to repair the product. 2. The end user shall not be entitled to assert more extensive claims against Geberit on the basis of this warranty.
Geberit. Simplified EU Declaration of Conformity Geberit International AG hereby declares that the radio equipment type Geberit AquaClean Mera is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://doc.geberit.com/968881000.pdf...
Page 58
Easy Care Systems Ltd. Units 5 and 6 Lower Vicarage Road Southampton Hampshire SO19 7RJ T: 02380 420678 E: info@easycaresystems.co.uk Special Products and Service www.easycaresystems.co.uk...
Need help?
Do you have a question about the AQUACLEAN MERA COMFORT and is the answer not in the manual?
Questions and answers