Setting the spray intensity ....................Setting the spray arm position..................Saving user profiles......................Calling up user profiles....................Saving your personal user profile in the Geberit AquaClean app ........How to program the device ..................... Overview of the programming options................Basic settings main menu ....................
Page 4
Replacing the remote control battery ................Re-assigning the remote control ..................Replacing the ceramic honeycomb filter ................ Sustainability ........................Geberit Group and sustainability ..................Ecodesign – ecobalance ....................Tips for reducing the ecological footprint................ Disposal ..........................Disposal of old electrical and electronic equipment ............
For your safety Who is this product suitable for? As a functioning toilet, the Geberit AquaClean shower toilet is suitable for all age groups. However, children must not carry out cleaning or maintenance work without supervision. How is this product used?
Geberit AquaClean has been removed (e.g. if you move house). • The Geberit AquaClean must only be connected to a mains voltage conforming to the specification plate. • Observe the manufacturer information at all times regarding the use of cleaning and descaling agents.
They provide warnings on specific hazards. These instructions correspond to the state of the device technology at the time of printing. Geberit reserves the right to make changes in terms of further development. A current version of this and other documents is available online: www.geberit.com.
The following signal words are used to indicate residual hazards in warning notes and important information. Symbol Signal word and meaning DANGER The signal word denotes a hazard with a high degree of risk which, if not avoided, will result in death or serious injury.
Getting to know your device About Geberit AquaClean devices The Geberit AquaClean device is a WC with integrated shower function. The device fulfils all the functions of a conventional toilet. Additional functions are subject to the design of your product.
About the operating concept The shower toilet can be operated via remote control, the lateral control panel on the shower toilet and the Geberit AquaClean app. Front side of the remote control All functions for daily use can be operated from the front side of the remote control.
Rear side of the remote control You can access system settings and additional functions from the rear side of the remote control. Battery compartment LCD display <up>/<down>, <left>/<right> arrow keys Lateral control panel The shower toilet functions of the device can be operated from the lateral control panel on the shower toilet.
• support for care and maintenance of the device • easy registration of your Geberit AquaClean shower toilet • function films • service and contact information The Geberit AquaClean app is available free of charge for Android and iOS smartphones in the respective app stores. Android: iOS: The range of functions available in the Geberit AquaClean app may vary from country...
Switching on the device Close the design cover. Wait at least 30 seconds between the switch-off and switch-on procedures. Open the design cover. Result ✓ When the blue status LED goes out, initialisation is complete. Turn on the power switch to start initialisation.
Switching off the device Close the design cover. Wait at least 30 seconds between the switch-off and switch-on procedures. Close the WC lid. Open the design cover. Restore to factory settings Prerequisite – You want to reset your personal settings and restore the factory settings as the basic settings.
How to use the device Getting started When using the device, the following functions should take place. When you sit down on the WC seat ring, • the water heating starts. • the device enables the spray functionality. • the odour extraction unit starts. •...
Switching the oscillating Or: press the <Shower> button on motion of the anal shower on the lateral control panel for 2 seconds. and off The oscillating motion of the spray arm increases the cleaning effect. Prerequisite – The shower procedure is running. Result ▶...
Adjusting the shower – The spray arm position can be set in 5 levels. procedure to your ▶ personal needs Touch the <left> or <right> button. ✓ The spray arm moves forwards or backwards. Setting the spray intensity Prerequisite – The shower procedure is running.
Calling up user profiles Saving your personal user profile in the Geberit User profiles allow you to access AquaClean app your personal settings directly. Select your user profile as soon as As long as you are in the detection you sit down.
How to program the device Overview of the programming options The following main menus are available: • [Basic settings] • [Profile settings] • [Care and maintenance] The system settings can be configured from the rear side of the remote control: •...
Basic settings main menu Basic settings Launch the [Basic settings] main menu using the <left>/<right> arrow keys on the rear side of the remote control. Use the <up>/<down> arrow keys to access the next menu item. Shown on display Note Select language Select the language of the display English...
Page 23
Shown on display Note [on] = The dryer functionality starts automat- Dryer ically after the spray functionality. [off] = The dryer functionality is deactivated. Dryer heating Temperature regulation of the dryer [on] = The odour extraction unit starts as Odour extraction soon as a user is detected on the WC.
Profile settings main menu Profile settings Launch the [Profile settings] main menu using the <left>/<right> arrow keys on the rear side of the remote control. Use the <up>/<down> arrow keys to select the settings which you would like to change. Shown on display Note User profile selection...
Page 25
Shown on display Note [on] = The oscillating motion of the spray arm Oscillating spray is activated. [off] = The oscillating motion of the spray arm is deactivated. [on] = The dryer functionality starts automat- Dryer ically after the spray functionality. [off] = The dryer functionality is deactivated.
Care and maintenance main Care and maintenance menu Launch the [Care and maintenance] main menu using the <left>/<right> Use the up/down arrow keys to arrow keys on the rear side of the access the next menu item. remote control. Shown on display Note Next descaling in Display in days until the next descaling...
Page 27
[yes] = Display of the device information Show device info [no] = Continue with the [Error message] menu Model Type/equipment version AquaClean Mera Classic Article number Geberit article number 146.xxx.xxx. Device serial number (required in case of Serial number GBxxxxxxxxxx...
Cleaning using aggressive and scouring cleaning agents can cause surface damage. ▶ Use Geberit AquaClean cleaning agents. Using the Geberit AquaClean cleaning set is recommended, as this set includes a ready-made cleaning agent that is ideal for cleaning all Geberit AquaClean surfaces.
Page 29
Recommended properties of suitable cleaning agents and cleaning equipment for best cleaning results: Symbol Properties of suitable cleaning agents Skin-friendly Cleaning agents are permitted to have a low acid content, e.g. heavily diluted citric acid Low-foaming Liquid Water-dilutable Symbol Suitable cleaning equipment Soft, fine-pored sponges Lint-free, soft cloths which are free of dust Toilet brush...
Aggressive and scouring cleaning agents can damage the surface. Only use mild, liquid cleaning agents that are kind to the skin. The Geberit AquaClean cleaning set (art. no. 242.547.00.1) includes a ready-made cleaning agent that is optimal for cleaning all Geberit AquaClean surfaces.
<Shower> button at the same time. Replace the spray nozzle if it can no longer be completely cleaned and descaled. Spray the spray arm with Geberit AquaClean cleaning agent. Then rinse the spray arm with water. Dry both parts carefully before re- assembling and re-fitting the spray arm.
Page 34
Press the <Shower> button to extend Replace the dryer nozzle if it can no the dryer arm. longer be completely cleaned. Press the <Shower> button on the lateral control panel. ✓ The dryer arm retracts completely. Result ✓ The cleaning procedure is now complete. ✓...
ATTENTION Aggressive descaling agents Inappropriate descaling agents can damage the device. ▶ Only use Geberit AquaClean descaling Remove the plug. agent for descaling. The descaling procedure should not be cancelled after filling the descaling agent because it would otherwise be flushed away unused.
Page 36
Wait until the device is ready for descaling. ✓ The display shows Now add the descaling agent ... Pour a bottle (125 ml) of Geberit AquaClean descaling agent into the filling opening. Use the arrow key to start the descaling procedure.
Device descaling message During installation, the device was configured for the local water hardness in accordance with the following table. This adaptation prevents unnecessary descaling procedures and helps protect the environment. Nevertheless, regular descaling of the device is required. Range °fH °dH °eH...
Troubleshooting Troubleshooting The table below explains what you need to do in the event of a fault: • Carry out the steps one after the other until the device is no longer demonstrating any faults or is working as normal again. •...
The shower toilet is without function The following table will help you with troubleshooting if the shower toilet is without function. DANGER Electric shock Incorrect maintenance work or troubleshooting can lead to serious injury or death. ▶ In case of malfunctions, the device must immediately be switched off at the power switch and the customer service must be contacted.
Other functional errors The following table will help you with troubleshooting if individual functions of the shower toilet have failed. The shower toilet can be used as a normal toilet even in the event of a malfunction. The spray arm and dryer arm must be fully retracted. You start the toilet flush as usual by pressing the buttons on the cistern.
• the remote control is not functioning, • the remote control is unable to control the shower toilet. The remote control is inactive while the Geberit AquaClean app is in use. Should the remote control fail to function, you can use the lateral control panel instead.
Replacing the remote control Re-assigning the remote battery control Prerequisite The device can only be operated – During the entire procedure, the remote with a single, assigned remote control must be located in the reception control. range of the shower toilet. ▶...
Page 43
Prerequisite Insert the new filter. – The status LED on the control panel lights up green. – At the push of a button, the display shows [Replace filter] on the rear side of the remote control. Bend the catch spring gently to the side to unfasten the ceramic honeycomb filter.
A company management geared to sustainability helps to save costs while minimizing risks at the same time. Geberit aims to act as a role model and set standards for its customers, suppliers and other partners. This means creating water-saving and sustainable products,...
Old equipment should be returned directly to Geberit where it will be disposed of appropriately. Addresses to which equipment can be returned can be requested from the relevant Geberit sales company.
Geberit and contracted by the end user to repair the product. 2. The end user shall not be entitled to assert more extensive claims against Geberit on the basis of this warranty.
Geberit. Simplified EU Declaration of Conformity Hereby, Geberit International AG, declares that the radio equipment type Geberit AquaClean Mera is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://doc.geberit.com/968860000.pdf.
Page 48
F +33(0)825 801 604 (RS) Geberit - Predstavništvo za www.geberit-aquaclean.fr Republiku Srbiju i Republiku Crnu Goru (AT) Geberit Vertriebs GmbH & Co. KG Vojvode Skopljanca 24 Gebertstrasse 1 (GB) Geberit Sales Ltd. SR-11000 Beograd A-3140 Pottenbrunn / St. Pölten...
Need help?
Do you have a question about the AQUACLEAN MERA CLASSIC and is the answer not in the manual?
Questions and answers