5.
TLS requires both server and user certification. Click Configure Certificate (see Note
below). The following window appears:
Use user certificate
Validate server certificate
Server name:
Server name should match exactly
6.
Click OK to apply the settings.
Check this box if your network
requires user certification and then
select the certificate from the drop-
down menu.
Check this box if your network
requires user certification and then
select the certificate authority from the
drop-down menu.
Type in the name of the server that is
used for 802.1 x authentication.
Check this box if the server name has
to exactly match the name in the certif-
icate.
Server Certificates require a wired connection to the network so you can
obtain the certificate(s) from the certificate authority. Your network
administrator can provide on certificate management.
29